Rear wheel brake cylinder Suitable for Porsche 356 built between 1950 and 1965 Manufacturer: JP Manufacturer number: 1661300200 Porsche comparison number: 695 352 513 01

Brake dust plate rear axle Suitable for Porsche 356 C right or left. Manufacturer : AIC Manufacturer Number : 56073 915 Porsche reference number : 695 352 801 10 / 69535280110

Teflon brake hose set / brake line kit The set is 4 parts with ABE for the front and rear axles. Suitable for Porsche 356 B + C Manufacturer Fischer / Germany Manufacturer Number: PO 106-4 Steel braided lines offer the following advantages: * exact pressure point * excellent dosing * direct response of your braking system * Proven 1000 times in racing * Martenproof * Incl. TÜV parts certificate * The original rubber cables from the body to the brake caliper are replaced Stahlflex brake lines offer several decisive advantages: The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance. The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket. Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security. A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.

Master Cylinder without Brake Light Switch, 19.05 mm, with 3 connections Suitable for Porsche 356 C 1963 - 1965 Manufacturer : JP Group Manufacturer Part Number : 1661100400 Porsche Equivalent Part Number : 695 355 011 00 / 69535501100

Brake pipe set Suitable for Porsche 356 A / B Manufacturer: Cohline Manufacturer Number: 9935 7908 You will receive the set of lines.

Master brake cylinder with 3 connections. Suitable for Porsche 356 C Year of manufacture: 1963-1965 Bore 19mm Manufacturer: ATE Manufacturer number: 03.3119-6551.3 Porsche comparison number: 695 355 011 00

Brake hose rear axle Suitable for Porsche 356 and 356 A 1x internal thread and 1x external thread You will receive 2 pieces. Length approx. 520 mm Manufacturer: JP Group A / S Manufacturer Number: 1661700100 Porsche reference number: 356 420 28

Wheel brake cylinder front left top 19 mm Suitable for Porsche 356 year of construction 1959-1962 Manufacturer : ATE Hersteller-Nummer. 03.2719-0209.3 Porsche reference number : 695 351 511 00 / 69535151100

Teflon brake hose set / brake line kit The set is 4 parts with ABE for the front and rear axles. Suitable for Porsche 356 A Manufacturer Fischer / Germany Manufacturer Number: PO 0106-4 Steel braided lines offer the following advantages: * exact pressure point * excellent dosing * direct response of your braking system * Proven 1000 times in racing * Martenproof * Incl. TÜV parts certificate * The original rubber cables from the body to the brake caliper are replaced Stahlflex brake lines offer several decisive advantages: The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance. The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket. Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security. A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.

Brake hose rear axle Suitable for Porsche 356 and 356 A. Manufacturer: JP Group A / S Manufacturer number: 1661700100 Porsche reference number: 356 420 28

JP brake line set 356A 1-circuit w. 7 lines Suitable for Porsche 356A year 50-61 Manufacturer: JP Group A / S Manufacturer Number: 1661500910 / EQ698008 Porsche reference number: 644 42 305, 644 42 306, 644 42 313, 644 42 314 and 695 352 602 01

JP brake line set 356B T6 1-circuit w. 8 lines Suitable for Porsche 356B year: 1962-1963 Manufacturer: JP Group A / S Manufacturer Number: 1661501110 Porsche reference number: 695 352 605 00

Steel brake line front right of the master cylinder Suitable for Porsche 356 A, B and C 1.5 year 55-65 Manufacturer : JP Group A/S Manufacturer number: 64442314 Porsche reference number: 644 42 314

Rubber grommets / plugs and tension clamps The plugs block the passage of the brake lines in the body at the front and rear. You get the set with 2 plugs and 2 clamps. Suitable for all Porsche 911/912/930 built between 1965 and 1989 Manufacturer : HT Manufacturer number : 914 355 651 00 Porsche reference number : Grommet 914 355 651 00 / 91435565100 Tension clamp 914 355 652 00 / 91435565200

Tension clamp for brake line plug in the tunnel The clamp holds the plug for the brake line feed-through in the front and rear of the body. You will receive 1 tension clamp. For a complete replacement 2 pieces are needed! Suitable for all Porsche 911 / 912 / 930, model years 1965 -1989 Manufacturer : HT Manufacturer number : 914 355 652 00 Porsche reference number : 914 355 652 00 / 91435565200

Steel rim/chrome rim The rim is a replica of the 356 wheel in a chrome-plated version Suitable for Porsche 356 A/B 1.5-1.6 01/55-12/63 VW Type 1 1.2-1.5 08/55-07/67 VW Karmann Ghia 1.2-1.5 08/55-07/67 VW Type 3 1.5-1.6 04/61-07/69 The rim has the size 4,5 x 15 " ET25. Rim size [inch] 15 Rim width [inch] 45 Rim number of holes 5 Bolt circle Ø [mm] 205 Offset (ET) [mm] 25 Material steel Surface chrome-plated A TÜV certificate or an ABE is not available. Manufacturer: JP Group VW comparison number: 111601025F

Brake line flared nut / union nut / brake line fitting / pipe connection nut Set of 10 pieces Bore diameter : 5.2 mm Thread size : M10x1 Overall length : 16.7 mm Flare type : F Spanner size 1 : 11 mm Manufacturer : ATE Manufacturer’s part number : 24.3516-0010.1

Brake Fluid Reservoir (Expansion Tank) Complete with cap, strainer, and mounting clamp Suitable for Porsche 356 C / 911 / 912 Suitable for models built between 1960 and 1967 All with single-circuit brake system Manufacturer : Hamburg-Technic Manufacturer part number : 69535590100 / 69535501300 Porsche equivalent number : 695 355 013 00 / 69535501300 695 355 901 00 / 69535590100

Distributor 3 ways, M 10X1.5 Suitable for : - Porsche 911 2.0-3.3 liter, year of construction 10/64-07/89 - Porsche 912 1.6 liter, year of construction 01/65-02/70 - Porsche 964 3.3-3.6 liter, year of construction 12/88-06/94 - Porsche 924S 2.5 liter, year of construction 09/85-07/88 - Porsche 944 2.5-3.0 liter, year of construction 06/81-07/91 - Porsche 928 4.5-5.4 liter, year of construction 09/77-11/95 - Porsche 968 3.0 liter, year of construction 06/91-11/95 Manufacturer : JP Group Manufacturer number : 1661550500 Porsche reference number : 914 355 667 00 / 91435566700 914 355 667 01 / 91435566701

SET brake caliper rear axle left/right Suitable for Porsche 356 C Suitable for Porsche 911 Year: 1965-1968 Suitable for Porsche 912 Year: 1965-1970 You will receive 2 pieces. Manufacturer: CPS Manufacturer number: Unknown Manufacturer: CPS Manufacturer number: Unknown Porsche comparison number: 901 352 965 10 Porsche comparison number: 901 352 966 10

Noel brake pads with 32mm pad You will get the set with 4 pieces Suitable for Porsche 356C and 911 / 912 Bj. 65-68 Manufacturer: Noel Porsche reference number: 901 352 097 10

Repro caliper front right Suitable for Porsche 356 and 911/912 Bj. 1963-1968 Piston diameter 38mm Brake disc thickness suitable for 10mm full disc Manufacturer: JP Group A / S Manufacturer number: 1661900980 Porsche reference number: 901 351 966 10

Repro caliper front left Suitable for Porsche 356 and 911/912 Bj. 1963-1968 Piston diameter 38mm Brake disc thickness suitable for 10mm full disc Manufacturer: JP Group A / S Manufacturer number: 1661900970 Porsche reference number: 901 351 965 10

Screw socket with strainer for brake fluid reservoir Suitable for Porsche 356 A / B year 50-63 Manufacturer: JP Group A / S Manufacturer number: 1661200200/35642412 Porsche reference number: 356 424 12