JP tapping nut Suitable for the lid emblem and all logos Suitable for all Porsches Manufacturer: JP Group A/S Manufacturer reference number: 1681650200 Porsche reference number: 999 591 423 03

Aluminum washers M 6 - 6.4 X 11 X 1.5 You will receive a bag with 100 washers The sealing washers for all M 6 bolt chain cases Oil strainer crankcase ventilation cover intermediate shaft etc Suitable for Porsche 911 from 1965-1989 Manufacturer : Elring Manufacturer Number : 232.157 Reference number : 900 031 011 30 / 90003101130

Oil filter Suitable for Porsche 356/912 year 59-69 Manufacturer: Hengst Manufacturer number : E110M D02 Porsche reference number: 546 07 827

Aluminum washers M 8 - 8.4x15x1.5 Suitable for all 2.0-3.2 from 1965-1989 For valve covers and engine housings Manufacturer: Elring Manufacturer number: 232.149 Reference number 900 031 014 30 You will receive a bag with 100 pieces.

HT heater flap connecting screw small complete Suitable for : - Porsche 356 year of construction 60-65 - Porsche 911 year of construction 65-86 Manufacturer : HT Manufacturer number : 90121168300 Porsche reference number : 901 211 683 00 / 90121168300

Rubber caps for spark plug connectors Suitable for all Porsche 911s from 1965-1989 The seal between the spark plug connector and valve cover. Manufacturer: Beru Porsche reference number 111 905 449 A You get the set with 6 pieces.

Oil Strainer Gasket Suitable for : - Porsche 356 A / B / C - Porsche 912 Manufacturer : Reinz Manufacturer Part Number : 539 01 152 Porsche Equivalent Part Number : 539 01 152 / 53901152

Plug / sealing plug for master brake cylinder Suitable for Porsche 356 year of construction 1960 - 1965, 911 year of construction 1965 - 1977, 914 year of construction 1970 - 1976. Manufacturer : Hamburg-Technic Manufacturer number : 90135592900 Porsche reference number : 901 355 929 01

Cylinder base gasket Suitable for all Porsche 356/912, all engines Copper 0.50 mm Dimension: Outside diameter 98 mm Inner diameter 90 mm Thickness / thickness 0.50 mm Manufacturer: Elring Manufacturer number: 509.830 Porsche reference number: 539 04 209

Aluminum washers M 8 - 8.4 x 15 x 1.5 Set of 25 pieces For valve covers and engine housings Suitable for: - All Porsche 911 2.0 - 3.2 liters - Model years 1965 - 1989 Manufacturer: Elring Manufacturer number: 232.149 Comparison number: 900 031 014 30 / 90003101430

Cable protection cap / rubber cap for reverse gear and temperature switch. Suitable for Porsche 356 / 911 / 912 / 914 / 930 built between 1960 and 1998 Manufacturer: JP Group Manufacturer number: 1696650100 Porsche comparison number: 914 613 491 00 / 91461349100

Bulb holder for instrument lighting 1-pole Suitable for : - Porsche 356 year of construction 60-65 - Porsche 911/912 year of construction 65-86 Manufacturer : JP Group Manufacturer number : 111957397 / 8196000600 Porsche reference number : 999 632 007 00 / 99963200700

Rubber grommets / plugs The plug seals the brake line feed-through in the front and rear of the bodywork. You will receive 1 plug. 2 are required for a complete replacement! Suitable for all Porsche 911 / 912 / 930 models built between 1965 and 1989 Manufacturer : JP Group Manufacturer’s part number : 1661550100 Porsche equivalent part number : 914 355 651 00 / 91435565100

Tappet tube / tappet guard tube / tappet rod, without gaskets, stainless steel Suitable for : - Porsche 356 A / B / C 1.6-liter, model years 01/1955 - 12/1965 - Porsche 912 1.6-liter, model years 01/1965 – 02/1970 Manufacturer : JP Group Manufacturer Part Number : 1611600300 Porsche Equivalent Number : 644 105 231 00 / 64410523100 PCG 105 231 00 / PCG10523100

Synchro Tester / Synchro Tester for Carburetor Systems Compatible with various carburetor systems and twin-carburetor setups, such as Solex, Dellorto, Weber, SU, Zenith, Stromberg, etc. Synchro tester for vertical and horizontal use - the measuring tube is adjustable. Ring dimensions: max. 75 mm outer diameter / min. 35 mm inner diameter. The ring is made of soft sealing rubber and conforms very well to any surface. Simply place the synchronizer tester in position, and the values can be determined using the scale inside the measuring tube; then move on to the next intake, and so on. Manufacturer : JP Group Manufacturer Part Number : 8105000700 / AC129250

Valve cover gasket made of cork Suitable for all Porsche 356 Manufacturer: Elring Manufacturer number: 020.753 reference number: 616 104 951 00

Reversing Light Switch / Reverse Gear Switch with Rubber Cap Suitable for Porsche 356 / 911 / 912 / 914 / 930 Model years 1960–1998 Manufacturer: HT Porsche Equivalent Part Numbers: - Reverse gear switch 914 613 541 02 / 91461354102 - Rubber cap 914 613 491 00 / 91461349100

Inline fuel filter Suitable for Porsche 356/911/912, all carburettor engines Manufacturer : Hengst Manufacturer number : H101WK Porsche reference number : none

Sechskantmuttern mit Klemmteil, Ganzmetall, 2-teilig: gelb Passiviert Passend für alle Porsche Modelle, alle Baujahre. Set 10 Stck Material : Ganzstahl-Sicherungsmutter Ganzstahl-Sicherungsmutter erfüllen die Normen DIN EN ISO 7042, DIN EN ISO 10513, Flanschmuttern nach DIN EN ISO 1664, DIN EN ISO 1667, (DIN 980, DIN 6925, DIN 6927, DIN ISO 7044). Gewindeart : M 6 Höhe : 6 mm Hersteller : Schek Porsche Vergleichsnummern: 99908407402 / 90091001102

Tab washers SET for oil pump / lock washer for intermediate shaft Suitable for all Porsche 911/964/993 Manufacturer: Stilcars Porsche reference number: 999 039 001 00

Generator pulley Pulley for alternator, inner Diameter: approx. 95 mm Suitable for _ - all Porsche 356 models built between 1950 and 1965 - all Porsche 912 models built between 1966 and 1969 Manufacturer: HT Manufacturer number: 53909315 Porsche comparison number: 53909315

Bulb socket instruments lighting, 2-pole Suitable for Porsche 356 year 60-65 Manufacturer: H&B Manufacturer number: 85785043 Porsche reference number: 644 741 902 00

Cylinder base gasket 1,0mm Suitable for all Porsche 356/912, all engines Dimension: Outside diameter 98 mm Inner diameter 90 mm Thickness 1.00 mm Manufacturer: Elring Manufacturer Number: 509.840 Porsche reference number: 539 04 209

hexagonal nuts with clamping part, All-metal, 2-piece: yellow Passivated Suitable for all Porsche models, all model years. Set 10 pieces Material : All-steel lock nut All-steel lock nuts meet standards DIN EN ISO 7042, DIN EN ISO 10513, flange nuts according to DIN EN ISO 1664, DIN EN ISO 1667, (DIN 980, DIN 6925, DIN 6927, DIN ISO 7044). Thread type : M 8 x 1.25 x 8 Height: 8 mm Manufacturer : Schek Porsche comparison numbers: 999 084 095 02