Brake light switch 2 pole Suitable for Porsche 911 year 84-89 Manufacturer number: 113 945 515 H Porsche reference number: 113 945 515 H

Teflon brake hose set / brake line kit The set is 4 parts with ABE for the front and rear axles. Suitable for Porsche 904 Manufacturer Fischer / Germany Manufacturer Number: PO 107-4 Steel braided lines offer the following advantages: * exact pressure point * excellent dosing * direct response of your braking system * Proven 1000 times in racing * Martenproof * Incl. TÜV parts certificate * The original rubber cables from the body to the brake caliper are replaced Stahlflex brake lines offer several decisive advantages: The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance. The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket. Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security. A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.

Sensor, brake pad wear Suitable for Porsche 911 year 74-89 Manufacturer: JP Group A / S Manufacturer number: 1697302100 Porsche reference number: 930 612 211 00

Brake Light Switch, 3-pin Suitable for : - Porsche 911 2.0-liter, model years 1964 - 1968 - Porsche 912 1.6-liter, model years 1965 - 1969 - VW Golf/Jetta 1.1–1.8-liter (including diesel), model years 1974 - 1983 - VW Type 1 1.2–1.6-liter, model years 1969 - 1986 - VW Transporter T2 1.6–2.0-liter, model years 1969 - 1979 - VW Transporter T3 1.6–2.1 liters (including diesel), model years 1979 - 1985 - VW Karmann Ghia 1.3–1.6 liters, model years 1969 - 1974 - VW 181 1.5–1.6 liters, model years 1969 - 1979 - VW Buggy 1.2–1.6 liters, model years 1969 - 1971 - VW Baja 1.2–1.6 liters, model years 1969 - 1986 Number of connections : 3 Thread size : M10x1 Operating mode : hydraulic Manufacturer : JP Group Manufacturer part number : 8196600200 VAG / Porsche equivalent part number : 1139455151 / 113945515G

Rear brake pad set Suitable for Porsche Macan 95B 2.0 3.0 GTS 3.6 Manufacturer: Textar Manufacturer number: 2564203 Porsche reference number: 95B 698 451 A

Master brake cylinder Suitable for Porsche 911 2.7 / 3.0 / 3.2 SC, model years 1978 - 1989 Diameter : 20.64 mm Thread size : M10x1 Number of connections : 3 Length 1 : 18.5 mm Length 2 : 166 mm Manufacturer : JP Manufacturer’s part number : 1661100500 Porsche equivalent part number : 911 355 011 12 / 91135501112

Master cylinder Suitable for Porsche 911 2.7 3.0 3.2 SC year 1977 - 1989 Manufacturer: ATE Manufacturer number: 03.2120-2462.3 Porsche reference number: 911 355 011 12/911 355 011 11

Tension clamp for brake line plug in the tunnel The clamp holds the plug for the brake line feed-through in the front and rear of the body. You will receive 1 tension clamp. For a complete replacement 2 pieces are needed! Suitable for all Porsche 911 / 912 / 930, model years 1965 -1989 Manufacturer : HT Manufacturer number : 914 355 652 00 Porsche reference number : 914 355 652 00 / 91435565200

Brake Line Set for the Dual-Circuit Brake System Set of 10 lines Fits Porsche 911 / 912 Fits model years 1969–1976 Manufacturer: JP Group A/S Manufacturer Part Number: 1661500210 Porsche Equivalent Part Number: None

Brake hose set for the front and rear axles The set contains 4 pieces: 2 for the front axle and 2 for the rear axle Suitable for Porsche 911 model year 1969 - 1983 1x female thread and 1x female thread Front, length approx. 320 mm Rear, length approx. 240 mm Manufacturer : JP Group Manufacturer’s part number : Front 90135563201 Rear 90135563101 Porsche equivalent part number : Front 901 355 632 01 / 90135563201 Rear 901 355 631 01 / 90135563101

HT spring plate for brake pads front axle Suitable for : - Porsche 911 (991) C2, C4, C4S GTS Year of construction 2012 - 2016 - Porsche 911 (991) Turbo GT2 RS Year of construction 2018 - 2020 - Porsche 911 (911) Turbo, Turbo S Year of construction 2014 - 2020 - Porsche Boxster (981) Year of construction 2012 - 2016 - Porsche Cayenne (958) year of construction 2011 - 2018 Manufacturer : HT Manufacturer number : 97035195901 Porsche reference number : 970 351 959 01 / 97035195901

Brake Master Cylinder Suitable for Porsche 911 from 1965-1977 For all Porsche 911/914 with 2-circuit brake system Manufacturer: ATE Manufacturer number: 03.2119-2301.3 Porsche reference number 901 355 012 00

Repair kit: Rear brake calliper seal set / Rear axle brake seal set Suitable for : - Porsche 911 / 912, model years 1965–1977 - Porsche 912, model years 1965–1970 Manufacturer : ATE Manufacturer’s part number : 13.0441-3805.2 / 13-0441-3805-2 Porsche equivalent part number : 901 352 998 00 / 90135299800

Brake line flared nut / union nut / brake line fitting / pipe connection nut Set of 10 pieces Bore diameter : 5.2 mm Thread size : M10x1 Overall length : 16.7 mm Flare type : F Spanner size 1 : 11 mm Manufacturer : ATE Manufacturer’s part number : 24.3516-0010.1

Brake line set with 10 lines Fits 2-circuit brake systems Fits Porsche 911 / 912 Fits model years 1968–1971 PORSCHE 90135561102 PORSCHE 90135561200 PORSCHE 90135561900 PORSCHE 90135562001 PORSCHE 90135562102 PORSCHE 90135562202 PORSCHE 90135562701 PORSCHE 91135565305 PORSCHE 91435560300 PORSCHE 91435569100 Manufacturer: JP Group Manufacturer Part Number: 1661500510 / EQ698004

Master brake cylinder Suitable for Porsche 930 Turbo 3.3, model years 1978 - 1989 With warning device Number of connections: 2 Diameter : 23.8 mm Thread size : M10x1 Manufacturer : ATE Manufacturer’s part number : 03.2123-0162-3 Porsche equivalent part number : 930 355 011 02 / 93035501102

Brake hose front Suitable for Porsche 911 year 65-89 Manufacturer: JP Manufacturer number: 8547121 Porsche reference number: 901 355 632 01

Brake hose SET Brake hoses front axle / rear axle Suitable for Porsche 911 from 1969-1989 1x internal thread and 1x internal thread You get the SET 4 pieces, with abrasion protection Front, length approx. 320 mm Rear, length approx. 240 mm Manufacturer: JP Group A / S Manufacturer Number: Front 90135563201 Rear 91135508700 Porsche reference number: Front 901 355 632 01 Rear 911 355 087 00

SET bleed valves / bleed screws for brake caliper complete with cap Suitable for Porsche 911 built between 1969 and 1983 You get 2 bleed valves with 2 caps for the rear axle Wrench size 7 Manufacturer: ATE Manufacturer Part Number: 03.3518-4200.1 Wrench size 1 [mm] 7 Thread dimension M7 Length [mm] 16.5 Overall length [mm] 33.0 Thread size [mm] M7 Thread pitch [mm] 1 Length [mm] 33 Wrench size [mm] 7 Manufacturer: ATE Manufacturer Part Number: 03.3518-4200.1 Porsche comparison number: 901 352 977 10

Distributor 3 ways, M 10X1.5 Suitable for : - Porsche 911 2.0-3.3 liter, year of construction 10/64-07/89 - Porsche 912 1.6 liter, year of construction 01/65-02/70 - Porsche 964 3.3-3.6 liter, year of construction 12/88-06/94 - Porsche 924S 2.5 liter, year of construction 09/85-07/88 - Porsche 944 2.5-3.0 liter, year of construction 06/81-07/91 - Porsche 928 4.5-5.4 liter, year of construction 09/77-11/95 - Porsche 968 3.0 liter, year of construction 06/91-11/95 Manufacturer : JP Group Manufacturer number : 1661550500 Porsche reference number : 914 355 667 00 / 91435566700 914 355 667 01 / 91435566701

Noel brake pads with 32mm pad You will get the set with 4 pieces Suitable for Porsche 356C and 911 / 912 Bj. 65-68 Manufacturer: Noel Porsche reference number: 901 352 097 10

Master brake cylinder 1 circuit Suitable for Porsche 911 / 912 Year of construction 1965 - 12 / 1967 Length 1 [mm]: 14.5 Number of connections: 2 Diameter [mm]: 19.05 Thread size: M10x1 Manufacturer ATE Manufacturer No. 3.3119-7251.3 Porsche comparison number 901 355 011 01

Connection fitting / hose connector / elbow, for master cylinder Diameter: 8 mm Bend: 95° Manufacturer : ATE Manufacturer’s part number : 03.3390-0055.1 Porsche equivalent part number : none

ATE connecting piece for master brake cylinder Suitable for Porsche 911 The diameter is 8mm 105 ° bend Manufacturer: ATE Manufacturer number: 03.3390-0139.1 Porsche reference number: without