Chain tensioner conversion kit complete with cover and accessories Suitable for all Porsche 911 2.0 - 3.2 models built between 1969 and 1989 Chain case cover with oil lines for the chain tensioners Seals and washers with nuts for the chain case cover and fastening for the supply line for the tensioner. Manufacturer : GF Manufacturer number : 930 105 912 00 Porsche comparison number : 930 105 912 00 / 93010591200

Chain tensioner conversion kit, left, complete with cover and accessories Suitable for all Porsche 911 2.0 - 3.2 models built between 1969 and 1989 Manufacturer : GF You will receive : 1 chain tensioner, left, with Chain case cover with oil lines for the chain tensioners The seals and washers with nuts for the chain case cover and the fastening for the supply line for the tensioner. Porsche comparison number : 930 105 911 00 / 93010591100

Chain adjuster complete with sealing ring Suitable for all Porsche 911 2.0 - 3.2 year 1969-1989 As a replacement for the hydraulic tensioner Chain adjuster 930 105 058 03 Sealing ring 12X 1.78 999 701 690 40 Manufacturer: GF Manufacturer Number: 93010505803 Porsche reference number: 930 105 058 03

Oil line / connecting line from the engine to the oil thermostat Suitable for all 2.4 S and 2.7 Ltr Carrera RS with the thermostat on the oil tank, 911 S, RS and 911 2.4 Ltr Only suitable for model year 1973 Manufacturer: Cohline Manufacturer number: 91110772410 Porsche reference number: 911 107 724 10

Motor carrier Suitable for Porsche 911 Suitable for all 911 SC and 3.2 Carrera Manufacturer: HT The traverse is with the thread for the 2 fastening screws Porsche reference number 930 375 011 01

Engine cover plate left Suitable for Porsche 911 SC year 1977 -1989 Manufacturer: JP Group A/S Manufacturer number: 1682600970 / 591198-1 Porsche reference number: 911 106 083 01

Noel engine cover plate rear 911 2.7 RS 73-75 Suitable for Porsche 9112.7 RS from 1973-1975 Manufacturer: Noel Porsche reference number 901 106 085 00

Clamp for injection lines SET Suitable for Porsche 911 E / S / RS All engines with mechanical petrol injection Suitable for model year 1969 - 1977 You will receive the set consisting of upper and lower part. Manufacturer: Stilcars Manufacturer number : 93300015 / 91111033300 Porsche reference number: 911 110 333 00

Connecting pipe for the idle control of the air scoop Suitable for all 3.2 Carrera Porsche 911 year: 1984-1989 Manufacturer: HT Manufacturer number: 93010166500 Porsche comparison number: 930 101 665 00

Oil line / oil hose Suitable for Porsche 911 and 930 3.3 Turbo The oil line supply line from the engine to the turbocharger Manufacturer: Cohline Manufacturer Numbers: 930 107 125 03/930 107 125 08 Porsche reference numbers: 930 107 125 03/930 107 125 08

Drive wheel camshaft Suitable for all Porsche 356 Year of construction 1950- 1965 Suitable for Porsche 912 Year of construction 1965-1970 License plate 0 Manufacturer : Sebro Porsche comparison number PCG 105 103 02

Left Chain Tensioner Cover with Accessories Fits all Porsche 911 2.0–3.2 models from 1969–1989 with hydraulic chain tensioners. Manufacturer: GF Part Number: 911 L S You will receive the chain cover with the oil lines for the chain tensioner, the gasket for the chain cover, the bracket for the tensioner’s supply line, and nuts and washers for the cover See image for contents of delivery. Porsche equivalent part numbers: 1 left cover: 930 105 063 08 1 gasket for left cover: 930 105 191 03 1 oil hose, left: 930 107 347 03 1 oil line, left: 930 107 347 02 1 bracket, left: 930 107 341 00 1 Hollow screw: N 021 073 1 2 Sealing rings: 900 123 115 30 1 Pipe clamp: 999 511 174 02 1 Cylinder head screw M4x10: 900 119 059 02 10 washers 6.4: 900 031 011 30 10 lock nuts M6: 900 910 012 02

Chain tensioner cover, right, with accessories Suitable for all Porsche 911 2.0 - 3.2 models built between 1969 and 1989 with hydraulic chain tensioners. Manufacturer : GF Manufacturer number : 911 R S You will receive the chain case cover with the oil lines for the chain tensioner, the gasket for the chain case cover, the holder for the supply line for the tensioner, and nuts and washers for the cover. Porsche comparison numbers : 1 cover, right: 930 105 064 10 1 seal for cover, right: 930 105 192 01 1 oil hose, right: 930 107 348 11 1 oil line, right: 930 107 348 08 1 Holder, right: 930 107 342 01 1 Hollow screw: N 021 073 1 2 Sealing rings: 900 123 115 30 1 Pipe clamp: 999 511 174 02 1 cylinder screw M4x10: 900 119 059 02 10 washers 6.4: 900 031 011 30 10 lock nuts M6: 900 910 012 02

HT rubber sleeve between turbocharger/intake pipe or intake pipe/valve housing Suitable for all Porsche 911/930 Turbo 3,0 and 3,3 Bj. 75-89 Manufacturer: HT Manufacturer reference number: 93011015801 Porsche reference number: 930 110 158 01

Mahle piston and cylinder repair kit 503 28 90 Set of 6 piston cylinder piston rings and piston pins Complete with piston pin fuses Suitable for Porsche 911 2.0 S with MFI 170 HP Year of construction 1968-1969 Suitable for engine code 901.10 Manufacturer: Mahle Manufacturer number: 503 28 90 Compression 9.8: 1 Porsche comparison number 901 103 911 01 / 901 103 911 02

Piston 503 08 00 The piston is supplied with a piston pin, piston pin retainers, and piston rings. Suitable for Porsche 911 2.0 S carburetor 160 hp, model years 1967–1968 Manufacturer : Mahle Manufacturer Part Number : 503 08 00 / 5030800 Compression Ratio : 9.8:1 Porsche Equivalent Number : 901 103 307 90 / 90110330790

Mahle piston and cylinder assy repair kit You will receive 6 Assys, each with 1 piston and 1 cylinder as well as 1 piston pin and 2 circlips. Suitable for Porsche 911 2,4 S year of construction 1972 - 1973 Suitable for engine 911 53 / 63 190 hp Bore : 84 mm Manufacturer : Mahle Manufacturer number : 5030190 Porsche reference number : 911 103 944 02

Piston Mahle Suitable for Porsche 911 2.7 k- Jetronik 165 / 175 hp Manufacturer : Mahle Manufacturer number : 503 59 00 The piston is supplied with piston rings, piston pins, and piston pin retaining rings. Bore : 90.00 mm / 165 / 175 hp Porsche comparison number : PCG5035992

Mahle pistons and cylinders Suitable for Porsche 911 3.0 SC 204 PS Bore 95.00 mm Manufacturer: Mahle Manufacturer Number: 503 81 92 The cylinder is coated with Nikasil. The piston is including piston rings, piston pins and piston pin circlips. You will receive 1 piston and cylinder each.

Aluminum Cylinder / Cylinder Liner / Cylinder Bore Liner Bore : 95mm The cylinder is Nikasil-coated Suitable for: - Porsche 911 SC 180/188/204PS - Porsche 911 3.0 Turbo 260PS Manufacturer : Mahle Manufacturer Part Number : 503 WR 27 / 503WR27 Porsche Equivalent Part Number : 930 104 119 90 / 93010411990

Piston Mahle Suitable for Porsche 911 3.0 Turbo 260 hp built in 1975 - 1977 Bore 95.00 mm 260 hp Manufacturer: Mahle Manufacturer number 503 67 00 The piston is incl piston rings, piston pin and piston pin securing rings

Mahle piston and cylinder repair kit Suitable for Porsche 911 Carrera 3.2 liter year 1984-1989 Engine number 930.20 / 930.26 Manufacturer: Mahle Manufacturer number: 503 55 92 The piston is supplied with piston pin, piston pin retainers and the piston rings. You will receive 1 piston and 1 cylinder as well as 1 piston pin and 2 circlips. Bore 95.0 mm, compression 10.3:1 Porsche comparison numbers: 930 103 989 01 930 103 989 02 930 103 989 03

Piston ring set 6 pieces Dimensions : 1.5/ 1.5/ 4.0mm with 80mm bore Suitable for Porsche 911 2.0S 160hp year 65-69 Manufacturer : Mahle Manufacturer number : 503 08 NO You will receive 6 piston rings as a set. Porsche reference number 901 103 901 01

Piston rings set 6 pieces Suitable for Porsche 911 2.2S and 2.4T / E / S year 1970-1973 Manufacturer : Mahle Manufacturer number : 503 03 NO Dimensions: 1.5 / 1.5 / 4.0mm - 84mm bore You will receive 6 piston rings as a set. Porsche reference number 911 103 945 00