Starter ring Suitable for Porsche 911 Turbo 3,0 built in 1975 - 1977 Manufacturer: SWAG Manufacturer number 930 116 230 00 Porsche reference number 930 116 230 00

Starter ring Suitable for 911 Turbo 3.3 year 1978 - 1988 Manufacturer: SWAG Manufacturer number 930 116 230 03 Porsche reference number 930 116 230 03/930 116 230 02

Mounting bracket clamp for motor stand Suitable for QSC mounting stand Manufacturer: QSC / USA Manufacturer number CLAMP02 Due to the manufacturing process, it can lead to Farbabweicheungen. The axle diameter is approx. 60 mm The hole diameter of the four through holes is 12mm. The hole distance in the length is 141mm and in width 172mm from hole center to hole center

Oil pipe / oil hose Suitable for Porsche 911 and 930 3.3 Turbo The oil line connects the oil pump with the oil tank Manufacturer: Cohline Manufacturer number: 93010733603 Porsche reference number: 930 107 336 03

Rubber mount for turbo intercooler Suitable for 911 / 930 Turbo 3.3 year 1975-1998 All 964 / 993 Turbo All 996 and 997 front water cooler rubber mounts Manufacturer : HT Manufacturer number: 930 113 430 00 Porsche reference number: 930 113 430 00

HT heating tube engine sheet metal rear left Suitable for Porsche 964/911 Carrera Year: 1989-1994 Manufacturer: HT Manufacturer Part Number: 93021104501 Porsche Reference Number: 930 211 045 01

Mahle pistons and cylinders Repair kit Suitable for Porsche 911 2,0 S carburettor 160 PS Year of manufacture 1967-1968 The cylinders are Nikasil coated. The pistons are incl. piston rings, piston pin and piston pin circlips You will receive the set with 6 cylinders and 6 pistons Manufacturer : Mahle Manufacturer number : 503 08 00 Bore 80 mm Compression 9,8 : 1 Porsche reference number : 901 103 906 01 / 90110390601

Rocker Arm Axle / Rocker Arm Shaft Suitable for Porsche 911 / 964, model years 1965–1993 Manufacturer : HT Manufacturer Part Number : 90110534204 Porsche Equivalent Part Number : 901 105 342 04 / 90110534204

Bosch injection nozzle Suitable for Porsche 911 2.7 and 3.0 SC built between 1974 and 1983 Manufacturer : Bosch Manufacturer number : 0 437 502 004 Porsche comparison number : 911 110 225 01 / 91111022501

Engine mounts / gearbox mounts / transmission mounts Set of 2 bearings Engine mounts for Porsche 911 built 1965 - 1989 Gearbox mounts for Porsche 911 built 1972 - 1986 Manufacturer : HT Manufacturer number : 911 375 043 00 Porsche reference number : 911 375 043 00 / 91137504300

Stud bolt / stud bolt The stud bolt connects the engine block to the gearbox Length 70 mmm Suitable for Porsche 911 engine housing Suitable for model year 1965-1986 Manufacturer : Noel Porsche reference number 999 061 034 02

Oil return pipes / oil pipes for Porsche 911 Set contains 4 oil return pipes Suitable for Porsche 911 year of construction 1965-1989 Manufacturer : HT Manufacturer number : 901410735101 Porsche reference number : 901 107 351 01 / 90110735101

Alternator V-belt / Narrow V-belt / Alternator belt Suitable for : - Porsche 911, model years 1965 - 1975 - Porsche 911, model years 1980 - 1989 Manufacturer : ContiTech Manufacturer’s part number : AVX10x710 Porsche equivalent part number: 999 192 176 50 / 99919217650 999 192 013 50 / 99919201350

Idle speed regulator / idle speed control valve Suitable for Porsche : 911 3.2 911 SC Carrera 924 2.5 S 944 2.5 944 Turbo 2.7 Manufacturer : HT Manufacturer number : 930 606 161 00 Porsche reference number : 930 606 161 00 / 93060616100

Engine mounts / transmission mounts Reinforced / Sport Set of 2 mounts Suitable as engine mounts for Porsche 911 model year 1965-1989 Suitable for transmission cross member 915 Suitable for Porsche 911 year of construction 1972-1986 Manufacturer: HT Manufacturer number 91137504307 Porsche reference number: 911 375 043 07

Inductive sensor / Inductive pulse generator / Speed sensor / Crankshaft sensor / Speed transducer / Reference mark sensor Pulse generator for crankshaft, speed sensor, engine management Suitable for Porsche 911 Carrera 3.2-litre, model years 1984 - 1989 Manufacturer : HT Manufacturer’s part number : 911 606 215 01 Porsche equivalent part number : 911 606 215 01 / 91160621501

Washers for engine mounts and gearbox mounts Set of 4 Four pieces are required for each of the rear engine mounts or gearbox mounts. Suitable for Porsche 911 Suitable for model years 1965-1989 Manufacturer: JP Group Porsche comparison number: 901 305 311 00

Surface seal Loctite 574 For use on rigid metal parts (e.g. cast iron components / pump housings) High oil resitance The sealing suitable for all Porsche 911 964 993 Manufacturer Loctite Henkel Manufacturer No. Loctite 574

Glyco bearing bush for rocker arm Suitable for Porsche 901 / 911 / 930 / 964 / 993 Manufacturer : Glyco Manufacturer number : 56-2698 SEMI Porsche reference number : 901 105 341 01 / 90110534101

Stud bolt / stud bolt The stud bolt connects the engine block to the gearbox and the starter motor Length 102 mmm Suitable for Porsche 911 engine housing Suitable for model year 1965-1989 Manufacturer : Noel Porsche reference number 999 062 192 02

Rocker Arm Axles / Rocker Arm Shafts Set of 12 Fits Porsche 911 / 964, model years 1965–1993 Manufacturer : Hamburg-Technic Manufacturer part number : 90110534204 Porsche equivalent part number : 901 105 342 04 / 90110534204

Oil return pipe / oil pipe - repair kit Two-piece oil return pipe made of aluminum For replacing leaky oil return pipes without dismantling the engine. Suitable for : - Porsche 911 built between 1965 and 1989 - Porsche 964 built between 1989 and 1994 - Porsche 993 built between 1994 and 1998 Manufacturer : Hamburg-Technic Manufacturer number : 93010704001 / 90110735101 Porsche comparison number : 930 107 040 01 / 90110735101 930 107 040 01 / 93010704001

Gasket carburetor connection part to air filter box Suitable for Porsche 911 year of construction1967 -1973 Manufacturer : JP Group Manufacturer number : 1618650300 Porsche reference number : 901 108 214 03 / 90110821403

Piston Mahle Suitable for Porsche 911 3.2 Carrera year 1983-1989 Compression 10.3: 1,231 HP Cylinder bore [mm]: 95.0 mm Length [mm]: 74.3 mm Compression height [mm]: 32.8 mm Bolt length [mm]: 58.0 mm Bolt Ø [mm]: 23.0 mm Valve pocket depth 1 [mm]: 48.4 mm Valve pocket depth 2 [mm]: 50.1 mm Surface: tin plated Fire bridge height [mm]: 6.4 mm Production number: 95 P 36 Piston clearance [mm]: 0.035 mm Component number: 1. M 1.5 P Component number: 2. NM 1.75 P Component number: 3. GSF 3.5 Manufacturer: Mahle Manufacturer number: 503 55 00 The piston is equipped with piston rings, piston pins and piston pin circlips.