Turbo Bypass Membrane Wastegate Membrane Suitable for all Porsche 911 / 930 / 965 Turbo Year: 1975-1994 Manufacturer: HT Manufacturer Part Number: 930 123 210 01 Porsche comparison number 930 123 210 01

Gasket between oil tank, oil filter, and inner rear fender. Suitable for Porsche 911 models built between 1965 and 1971 Manufacturer : HT Manufacturer number : 901 107 291 00 Porsche comparison number : 901 107 291 00 / 90110729100

Intake scoop Suitable for Porsche 911 Carrera 3.2 Suitable for years 1984 - 1989 Manufacturer : HT Manufacturer number : 930 110 356 02 Porsche comparison number: 930 110 356 02 / 93011035602

Engine cover plate on the left Suitable for Porsche 911 T E and S year 65-77 The bushing for the air hose on the left cover plate Manufacturer: HT Manufacturer number: 90110682500 Porsche reference number: 901 106 825 00

Air filter SET for carburetors Suitable for Porsche 911 with carburettor Weber / Zenit Kit includes Air filter element – ??x 2 Water protection top x 2 Air filter base x 2 Air filter top x 2 Air filter hardware kit Manufacturer: PMO Manufacturer No. PM-O314-0

Injection Pump Belt Only for cars with Mechanical Fuel Injection Suitable for Porsche 911 year 65-77 Manufacturer : Continental Manufacturer number: CT 561 Porsche reference number: 999 192 030 40

Carburetor gasket Suitable for Porsche 911 2.7 / 3.0 SC from 1974 - 1983 Manufacturer: Elring Manufacturer number: Reference number 911 110 394 02

Fuel tank pressure regulator Diameter : 73 mm Fuel injection system : K-Jetronic Length : 98 mm Suitable for : - Porsche 924, model years 1976–1978 - Porsche 911 2.4 T K-Jetronic (USA) - Porsche 911 2.7 / 2.7S, model years 1974–1976 - Porsche 911 3.0 Carrera, model years 1976 Manufacturer : Bosch Manufacturer’s part number : 0 438 170 015 Porsche equivalent part number : 477 209 083 / 477209083

Replacement hub for fan wheel / impeller / V-belt pulley half Suitable for Porsche 911 3.0 SC, model years 1977 - 1983 The replacement hub is supplied with the 6 aluminium rivets required for fitting. Manufacturer : HT Manufacturer’s part number : 911 770 830 00 Porsche equivalent number : 911 770 830 00 / 91177083000

Oil pump shaft Suitable for Porsche 356 B/C year 60-65, Porsche 912 year 65-69 Manufacturer: JP Group A/S Manufacturer number: 1613150200 Porsche reference number: 616 107 016 00

Extreme pressure grease Assembly paste for crankshaft bearings and connecting rod bearings Suitable for all Porsche engines Contents about 100 GR. Porsche reference number 000 043 204 17 Manufacturer: Castrol

Mahle aluminum cylinder Suitable for Porsche 911 2.0 T / E and S Manufacturer: Mahle Manufacturer number: 503 WR 18 The cylinders are Nikasil coated Bore 80 mm

Pistons and cylinders Suitable for Porsche 911 2.7 K-Jetronik 150 hp bore 90.00 mm Manufacturer: Mahle Manufacturer number: 5035892 The cylinder is Nikasil coated. The piston is equipped with piston rings, piston pins and piston pin retaining rings. Comparison number: 91110395191/911 103 951 91

Mahle Aluminum Cylinder Cylinder Liner Bore : 95 mm Suitable for Porsche 911 3.2 Carrera 207/218/231 hp Suitable for model years 1983 – 1989 Manufacturer : Mahle Manufacturer number : 503 WR 28 / 503WR28 Porsche comparison number : 930 104 126 92 / 93010412692

Stilcars Oil Line Engine Regulator Housing Suitable for Porsche 911 / 930 model years 1974 - 1983 The oil line connects the engine to the oil thermostat / regulator housing in the wheel well Manufacturer : Stilcars Manufacturer number : 91110774310 Porsche comparison number : 911 107 743 10 / 91110774310 911 107 743 12 / 91110774312

Oil pipe for inlet on the oil cooler at the front Suitable for Porsche 911 from 74-89 The hose connects the oil cooler under the fender with the oil lines under the sill Manufacturer : JP Group Manufacturer number : 1613700200 Porsche reference numbe r: 930 207 111 00 / 93020711100

Oil tank Suitable for Porsche 911 2.0 and 2.2 litres Suitable for year of construction 1965 -1971 Manufacturer JP Group A/S Manufacturer number : 592009/ 1612900100 Porsche reference number : 911 107 001 15

Air duct connection, hot air connection at the rear left Suitable for conversion to SSI heat exchanger Suitable for Porsche 911 930 Turbo 964 Turbo Year of construction 1969 - 1992 Manufacturer: JP Group A/S Manufacturer number: 1682602070 Porsche comparison number: 930 106 321 02

Connection hose in the engine compartment The hose includes the mounting bracket for the fan blower Suitable for Porsche 911, model years 1980–1983 Manufacturer: JP Group A/S Manufacturer part number: 1623500500 Porsche equivalent part number: 911 211 272 02

Rubber gearbox mounts / Engine mounts / Gearbox mounts / Rubber-metal buffers / Rubber mounts for engines and gearboxes Suitable for Porsche 912, model years 1965 - 1969 There are 4 fitted to the rear of the engine mount and 2 fitted to the gearbox cross-member. You will receive one piece Manufacturer : HT Manufacturer’s part number : 90230549201 Porsche equivalent number : 902 305 492 01 / 90230549201

Cylinder head nut M 10 SET Suitable for Porsche 911 / 930 model year 1965-1989 Set of 24 pieces sufficient for the complete engine. Manufacturer : HT Porsche reference number: 901 104 382 02

Intake manifold gasket Diameter: 3.7cm Suitable for Porsche 911 2.0 S carburetor 911 2.2 and 2.4 p 911 2.7 RS with MFI Suitable for Porsche 911 year 1965 - 1973 Manufacturer: Reinz Manufacturer number: 70-21903-10 Porsche reference number: 901 108 391 05

Mahle Piston Suitable for Porsche 911 2.4 T built 1972 - 1973 Bore 84 mm You will receive a piston with piston rings and piston bolts and piston bolt locking ring Manufacturer: Mahle Manufacturer number 503 18 00

Mahle piston Suitable for Porsche 911 2.4 S year 1972 - 1973 Manufacturer: Mahle Manufacturer number: 503 01 00 84 mm bore You get 1 piston with piston rings and piston pin. 6 pieces are required for a complete replacement.