Bilstein Gas Pressure Shock Absorber Front Axle - Turbo Version- Suitable for Porsche 911 from year of construction 7 / 85-11 / 90 For strut with external thread, shock absorber has female thread Manufacturer: Bilstein Manufacturer number: 34-001141 Porsche comparison number: 911 341 041 04/911 341 042 04

Bilstein shock absorber front axle model: Club Sport Suitable for Porsche 911 year 1971 - 1989 The damper comes complete with the mounting nut for boge struts with inside and outside thread. Manufacturer: Bilstein Manufacturer number 34-001165 / P36-0116 You will receive 1 piece.

Front Axle Kingpin Bearing Repair Kit Suitable for Porsche 911 / 912, model years 1965 - 1968 Set contains: 4x rubber bearings 2x sleeves 2x support washers 2x retaining plates 2x mounting nuts for shock absorbers Manufacturer : Stilcars Manufacturer’s part number : 9400035 Porsche equivalent part number : Rubber bushings 901 341 695 03 / 90134169503 Sleeve 901 341 685 00 / 90134168500 Support washer 901 341 629 00 (90134162900 Lock plate M14 900 038 002 01 / 90003800201 Mounting nut for shock absorber M14x1.5 N0110213

Auxiliary Carrier Axle Carrier Aluminum Front Axle, with 2 Pins Suitable for Porsche 911 Year of manufacture: 1969 -1989 Manufacturer : HT Manufacturer number : 91134101310 Porsche comparison number : 911 343 013 10 / 91134101310

Bilstein strut front axle B 6 Sport right Version : Sporty road Characteristic: 225/120 Suitable for Porsche 911 / 930 Manufacturer : Bilstein Manufacturer number : 35-003892 Porsche reference number : 911 341 044 11 / 91134104411

Bilstein strut front axle B 6 Sport left Version : Sporty road Characteristic: 225/120 Suitable for Porsche 911 year of construction 70-89 Manufacturer : Bilstein Manufacturer numbers : 35-003885 / V36-0388 You will receive the complete strut for the left side. Porsche reference number 911 341 043 11 / 91134104311

Screw set for dome bearing Suitable for Porsche 911 912 914 6 Allen screws for dome bearing M 10 X 20 Comparison number 900 067 063 02 6 lock washers M10 Comparison number 999 523 103 01 2 mounting nuts for shock absorbers M 14 X 1.5

Stop buffer for shock absorbers / rubber stop / rubber buffer, front axle Set 2 pieces The buffers are suitable for Boge and Koni shock absorber struts. Suitable for Porsche 911 model years 1965 - 1989 Manufacturer : HT Manufacturer’s part number : 90134330100 Porsche equivalent part number : 901 343 301 00 / 90134330100

Dust cap replacement seal for tie rod The sealing sleeve is supplied with the 2 wire seals Suitable for Porsche 911/912 from 1965-1989 Manufacturer: HT Manufacturer number: without Porsche reference number: without

Washer / Steering stop disc Suitable for Porsche 911 built between 1974 and 1989 Manufacturer : HT Manufacturer number : 930 347 313 01 Porsche comparison number : 930 347 313 01 / 93034703101

Strut bar for the front axle in the trunk, Carbon look Suitable for Porsche 911, 912 and 930 built in 1969-1989 The strut brace is attached to the original fittings using the 2 retainers at the attachment points of the mandrel bearing. Manufacturer : JP Group Manufacturer number: EQ880102 / 1684000500 Porsche comparison number : without

Rubber mount for stabilizer, front Diameter [mm] 16 Required number of pieces 4 Suitable for Porsche 911 year 1973-1977 Manufacturer: JP Group A / S Manufacturer number: 1640600400 Porsche reference number: 911 343 792 02

Bushing / Bearing Sleeve for Front Axle Control Arm, Rear Suitable for all Porsche 911 models from 1965 to 1969 Manufacturer : JP Group Manufacturer part number : 1640200100 Porsche equivalent part number : 901 341 421 03 / 90134142103

Strut Bearing / Strut Mount Set Front Axle Suitable for Porsche 911 built in 1969 -1998 911 T / E S / SC and all Carrera and Turbo. They offer on the set 2 Bushings Racing Version 85 Shore each consisting of upper and lower part. Manufacturer: Prekom Manufacturer number PR98A01P Porsche comparison number 911 341 018 00 They offer on the set 2 pieces

Bilstein shock absorber insert for Bilstein struts front axle Model: Series Suitable for Porsche 91 built in 1971 - 1989 Only for the original Bilstein struts The damper comes complete with the splint for the Bilstein struts Manufacturer: Bilstein Manufacturer number 34-050019 / R36-5001 You will receive 1 piece damper insert.

Bilstein shock absorber strut front axle B 6 left Suitable for Porsche 911/930 Manufacturer: Bilstein Manufacturer number: 35-00127 / V 36-01270 Porsche reference number 911 341 041 33 You get the complete strut for the left side.

Bilstein shock absorber strut front axle B 6 left Execution: Sport Suitable for Porsche 911/930 Manufacturer: Bilstein Manufacturer number: 35-003908 You get the complete strut for the left side.

Bilstein shock absorber strut front axle B 6 right Execution: Sport Suitable for Porsche 911/930 Manufacturer: Bilstein Manufacturer number: 35-003915 You get the complete strut for the right side.

Dome struts bracket set for welding, racing. Suitable for Porsche 911, RS, RSR and ST from 1965-1989 These were installed in all racing cars in the 1960s and 1970s in order to create the appropriate stability in the front axle. Material: steel, 3mm Set consisting of left and right side. The consoles are perforated. Manufacturer: MKL Manufacturer number: without Porsche reference number: without

Control arm front axle left / right Suitable for all Porsche 911/912 year of construction 1965-1967 The control arm is supplied complete with the stop disc and can be installed on the right or on the left. Manufacturer: JP A / S Manufacturer number 1640100900 Porsche reference number: 901 341 043 03

Bilstein shock absorbers for Bilstein front struts, model: Sporty Road Set of 2 pieces The shock absorbers are supplied complete with the split pins for the Bilstein struts. Suitable only for original Bilstein struts! Suitable for Porsche 911 model years 1971–1989 Manufacturer : Bilstein Manufacturer Part Number : 34-050507

Shear screw for the casing tube set of 3 pieces Depending on the year of manufacture, 1 to 3 piece needed. Porsche 911 .68-.73 1 piece Porsche 911 .74-.89 3 pieces Porsche 964 .89-.94 2 pieces Porsche 993 .94-.98 2 pieces Porsche 912 .68-.69 1 piece Manufacturer: HT Manufacturer number: 901 347 753 00 Porsche comparison number 901 347 753 00 Symbol „Von der Community überprüft“ In Google Übersetzer öffnen • Feedback geben Shear screw for the casing tube set of 3 pieces Depending on the year of manufacture, 1 to 3 piece needed. Porsche 911 .68-.73 1 piece Porsche 911 .74-.89 3 pieces Porsche 964 .89-.94 2 pieces Porsche 993 .94-.98 2 pieces Porsche 912 .68-.69 1 piece Manufacturer: HT Manufacturer number: 901 347 753 00 Porsche comparison number 901 347 753 00

Cover for steering gear / underprotector Suitable for Porsche 911/912 year 65-74 with steel auxiliary support Manufacturer: JP Group A / S Manufacturer number: 590905 Porsche comparison number: 911 341 161 00 Not suitable for 85 Ltr S plastic tank

Black leather steering wheel Diameter: Ø420 mm without horn button Suitable for Porsche 911, model years 65-68 Manufacturer: JP Group A/S Manufacturer number: 1645500300 Porsche comparison number: 901 347 082 71