Corrugated heating hose with aluminum coating; connects the heat exchangers to the heating air inlets. FOR Ø : 65 mm Fits Porsche 911 models from 1965 - 1983 You will receive 1 meter of hose Manufacturer : HT Manufacturer Part Number : 72053 Porsche Equivalent Number : 901 211 194 00 / 90121119400 901 211 194 01 / 90121119401

Heating flap connecting hoses, red, made of silicone. Length approx. 33 cm. Suitable for Porsche 911 models built between 1964 and 1989. The silicone hose consists o f: 1. Spring steel wire 2. Fabric-reinforced tape; wall: silicone-coated glass fabric 3. Cord for reinforcement Temperature range : -70°C to 260°C briefly up to 280°C Manufacturer : HT Manufacturer number : 93021162201 Porsche comparison number : 930 211 622 01 / 93021162201

HT heater flap connecting screw small complete Suitable for : - Porsche 356 year of construction 60-65 - Porsche 911 year of construction 65-86 Manufacturer : HT Manufacturer number : 90121168300 Porsche reference number : 901 211 683 00 / 90121168300

Rubber seal for tank sensor Suitable for : - Porsche 944 2.5 liter, year of construction 06/81-07/84 - Porsche 911 2.2-3.3 liter, year of construction 08/70-07/89 - Porsche 914 1.7-2.0 liter, year of construction 01/69-02/76 - Porsche 924 2.0-2.5 liter, year of construction 11/75-08/89 - VW Transporter T2 1.6-1.7 liter, year of construction 08/67-01/73 - VW Transporter T1 1.2-1.5 liter, year of construction 01/50-07/67 - VW Type 3 1.5-1.6 liter, year of construction 04/61-07/73 - VW Type 4 1.7-1.8 liter, year of construction 07/68-06/73 - VW Type 1 1.2-1.6 liter, year of construction 08/61-12/86 - VW Karmann Ghia 1.2-1.6 liter, year of construction 08/55-07/74 - VW 181 1.5-1.6 liter, year of construction 09/69-02/79 - VW Buggy 1.2-1.6 liter, year of construction 08/63-07/71 - VW Baja 1.2-1.6 liter, year of construction 08/68-12/86 Manufacturer : JP Group Manufacturer number : 8115850308 / 113919133 Porsche reference number : 477 919 133 / 477919133 VAG reference number : 113919133

Inline fuel filter Suitable for Porsche 356/911/912, all carburettor engines Manufacturer : Hengst Manufacturer number : H101WK Porsche reference number : none

Fuel filter / Petrol filter Suitable for : - all Porsche 911 3,2 - 3,6 - 3,8 - Porsche 924S - Porsche 944 - Porsche 928GT Manufacturer : Mahle Manufacturer number : KL 21 Porsche reference numbers : 928 110 253 04 / 92811025304 928 110 147 11 / 92811014711

Heater gasket / heater flap box seal Suitable for Porsche 911/912/930 year 65-89 Manufacturer: Noel Manufacturer number: 91121129700 The seals like original 60 / 70s made of cork and phenolic resin as a binder. Porsche reference number 911 211 297 00

Gasket Suitable for Porsche 911 year 69-89 Manufacturer: JP Group A / S Manufacturer number: 91121129700 Porsche reference number: 911 211 297 00

Rubber-metal bearing for fuel pump Support buffer for the fuel pump with 6 mm threaded holes Suitable for Porsche 911 year 74-89 Manufacturer : JP Group Manufacturer number : 1615250200 Porsche reference number : 911 608 206 00 / 91160820600

Fuel tank sender / Dip-tube sender / Fuel gauge sender / Fuel tank sender / Tank sender The transport lock must be removed before fitting!!! Suitable for Porsche 911 / 930, model years 1965 - 1989 Manufacturer : JP Group Manufacturer part number : 1615800200 Porsche equivalent part number : 901 741 801 00 / 90174180100

Mounting kit for front silencer Kit contains 3 gaskets, copper nuts, and bolts Suitable for: - Porsche 911 Carrera 3.2 liter, built between 1983 and 1989 - Porsche 911 SC/911 Carrera 2.7-3.0 liter, built between 1975 and 1983 Manufacturer: JP Group Manufacturer number: 92.100KIT / 1621700310

JP petrol tank sleeve / connecting hose The hose piece connects the tank pipe with the fuel tank in the boot. Suitable for all Porsche 911 models 65-89 Diameter : 50 mm Manufacturer: JP Group A/S Manufacturer number: 1615650400 Porsche reference number: 911 201 515 00

Rear silencer seal / Gasket for rear muffler Fits : - Porsche 911 2.0–2.4 L model years 1965–1973 - Porsche 911S model years 1970–1976 Manufacturer : Reinz Manufacturer part number : 901 111 193 00 Porsche equivalent number : 901 111 193 00 / 90111119300

Gasket for front silencer heat exchanger Suitable for Porsche 911 year 74-89, Porsche 964 year 89-94, Porsche 993 year 94-98. Manufacturer : Reinz Manufacturer number : 930 111 192 06/ 911 111 128 00 Porsche reference number: 930 111 192 06/ 911 111 128 00

Rear silencer seal SET Suitable for Porsche 911 2.0-2.4Ltr year 65-73 and for Porsche 911S year 70-76 Manufacturer: HT Manufacturer number: Porsche reference number: 901 111 193 00

Installation Kit for Heat Exchanger Fits Porsche 911 2.7–3.0 SC, model years 1975–1983 This installation kit is for 1 heat exchanger. Two installation kits are required for a complete replacement! Manufacturer: JP Group Manufacturer Part Number: 1621701510 / 91.101KIT Contents of 1 kit with Porsche equivalent part numbers: - 1 outlet gasket 930 111 192 01 - 3 inlet gaskets 930 111 191 01/13 - 3 M8x40 hex head screws 900 074 282 02 - 3 M8 locknuts 900 910 097 02 - 3 M8 hex nuts 900 076 025 02 - 3 M8 hex socket nuts 999 085 001 02

Mounting kit for heat exchanger Suitable for : - Porsche 911 E/S 2.4-2.7 liters, built between 1971 and 1976 - Porsche 911 T 2.0-2.4 liters, built between 1963 and 1973 - Porsche 911 S 2.7 liters, built between 1973 and 1975 You will receive the mounting kit for 1 heat exchanger. Two mounting kits are required for a complete replacement! Contents in 1 kit with Porsche comparison numbers : - 1 piece outlet gasket 901 111 193 00 / 90111119300 - 3 pieces inlet gasket 930 111 191 01 / 93011119101 - 2 pieces hexagon screw M10x32 900 075 140 02 / 90007514002 - 2 hex nuts M10 999 084 002 02 / 99908400202 - 3 hex nuts M8 900 076 025 02 / 90007602502 - 3 hexagon socket nuts M8 999 085 001 02 / 99908500102 Manufacturer : JP Group Manufacturer number : 1621701410 / 91.011KIT

Fuel tank seal/ sealing strap black Suitable for Porsche 911/912 year 65-89 The seal between the petrol tank and the body. The seal is made of fine polyurethane foam self-adhesive on one side. Width approx. 20 mm, length approx. 2.50 m. Sufficient for the fuel tank 65/85 and 100 ltr. Manufacturer: HT Manufacturer number: 90150493220 Porsche reference number: 901 504 932 20

Clamping strap for muffler diameter 510 mm with bolt SET Set of 2 clamping straps Suitable for Porsche 911 model years 1965 - 1983 Manufacturer : JP Group Manufacturer number : 1621400801 Porsche comparison number : 901 111 157 04 / 90111115704

bracket for exhaust Suitable for Porsche 911 year 65-83 2,0-3,0 SC Manufacturer: HT Manufacturer number: 901 111 151 04 Porsche reference number: 901 111 151 04

Fan Motor / Cabin Fan with Metal Housing Suitable for : - Porsche 911 3.2 Carrera, model years 1984 - 1989 - Porsche 964 Turbo, model years 1989 - 1994 Manufacturer : JP Group Manufacturer Part Number : 1626100100 Porsche Equivalent Number : 930 624 151 00 / 93062415100 965 624 151 00 / 96562415100 965 624 151 00 / 96562415100

Fuel tank cap with gasket Suitable for Porsche 356 built in 1960 - 1965 Suitable for Porsche 911 built between 1965-1977 Suitable for all Porsche 914-6 Suitable for the oil tank built in 1970-1976 Manufacturer: HT Manufacturer number: 90120127100 Porsche reference number 901 201 271 00

Pipe clamp with guide tube for heater damper cable, right Fits Porsche 911, model years 1965 - 1986 Manufacturer : Stilcars Manufacturer Part Number : 9240004 Porsche Equivalent Number : 901 211 052 21 / 90121105221

Rubber sleeve for heating trains Suitable for Porsche 911/930/914 The grommet seals the interior above the ignition lock to the trunk. The 3 bushings for the heating cables are also available from us. Manufacturer: HT Manufacturer number 914 571 151 10 Porsche reference number 914 571 151 10