Adjustment Washer / Spacer Washer for Alternator Belt Tension Set of 5 pieces Inner Diameter : 30 mm Suitable for Porsche 911, model years 1965 - 1989 Manufacturer : HT Manufacturer Part Number : 930 106 564 00 Porsche Equivalent Part Number : 930 106 564 00 / 93010656400

Gasket between crankshaft and flywheel Suitable for : - Porsche 356 all model years - Porsche 912 all model years Manufacturer : Reinz Manufacturer number : 70-11201-00 Porsche comparison number : 502 02 301 / 50202301

Reinz Seal Kit for Chain Case Cover (Right/Left) Suitable for : - Porsche 911, model years 1974 - 1989 - Porsche 914, model years 1970 - 1976 - Porsche 964, model years 1989 - 1994 Manufacturer : Reinz Manufacturer Part Number : 93010519204 93010519103 Porsche Equivalent Number : 930 105 191 03/93010519103 930 105 192 04/93010519204

Mahle Aluminum Cylinder Block Bore : 90 mm Suitable for Porsche 911 2.7 RS / 2.7 K-Jetronik Suitable for 2.7-liter engines with 150 hp / 165 hp / 175 hp / 210 hp Manufacturer : Mahle Manufacturer Part Number : 503 WR 24 / 503WR24 The cylinder is Nikasil-coated. Porsche Equivalent Number : 91110411190 / 91110411190

Oil line / oil hose Suitable for Porsche 911 / 930 built between 1969 and 1989 The oil line from the engine block to the camshaft housing for all engines with hydraulic chain tensioners - or engines, that have been retrofitted with hydraulic tensioners. Manufacturer : JP Group Manufacturer number : 93010734714 / 93010734705 Porsche comparison number : 930 107 347 14 / 93010734714 930 107 347 03 / 93010734703

Oil line / oil hose NEW The oil lines from the engine block to the camshaft housing on the left Suitable for Porsche 911 Year of construction 1965-1983 Manufacturer: Cohline Porsche reference number left 901 107 347 01/901 107 347 02

Installation Kit for Heat Exchanger Fits Porsche 911 2.7–3.0 SC, model years 1975–1983 This installation kit is for 1 heat exchanger. Two installation kits are required for a complete replacement! Manufacturer: JP Group Manufacturer Part Number: 1621701510 / 91.101KIT Contents of 1 kit with Porsche equivalent part numbers: - 1 outlet gasket 930 111 192 01 - 3 inlet gaskets 930 111 191 01/13 - 3 M8x40 hex head screws 900 074 282 02 - 3 M8 locknuts 900 910 097 02 - 3 M8 hex nuts 900 076 025 02 - 3 M8 hex socket nuts 999 085 001 02

Clutch kit NEW Suitable for : - all Porsche 911 2.4 / 2.7 / 3.0 SC and 3.2 Carrera - year of construction 8 / 71 - 8/86 The set is complete with clutch disc, pressure plate, Release bearing, the assembly material and the special grease Manufacturer : Sachs Manufacturer number : 3000 506 001 Porsche reference number : 915 116 911 00 / 91511691100

Bilstein Rear Axle Shock Absorber Fits Porsche 911 / 930, Model Years: September 1971–August 1989 Part Number: 196/133 Manufacturer: Bilstein Manufacturer Part Number: 24-001694 Porsche Equivalent Part Number: 911 333 501 54

Rear axle wheel bearing / rear wheel bearing Suitable for : - Porsche 911, model years 1974 - 1989 (not Turbo) - Porsche 944, model years 1985 - 1991 - Porsche 968, model years 1992 - 1995 Inner diameter : 42.00 mm Outer diameter : 80.00 mm Width : 42.00 mm Manufacturer : FAG Manufacturer’s number : 713 6122 10 Equivalent number : 999 053 020 01 / 99905302001 999 053 020 06 / 99905302006

Installation kit for brake pads front Suitable for Porsche 911 year 74-83 Manufacturer : ATE Manufacturer number: 13.0460-0157.2 Porsche reference number: -

Mounting screw for locking wedge Fits Porsche 911 / 912 / 930, model years 1967 - 1989 The screw is made of stainless steel, with a countersunk head and multi-tooth thread, micro-encapsulated, M 8 x 40 Manufacturer : HT Manufacturer part number : 99921900800 Porsche equivalent part number : 999 219 008 00 / 99921900800

Cover Ring / Rosette for Ignition Switch, Black Anodized Aluminum Suitable for : - Porsche 911 2.7–3.3 liters, model years 1973 - 1989 - Porsche 964 3.3–3.6 liters, model years 1988 - 1994 - Porsche 993 3.6–3.8 liters, model years 1993 - 1997 Manufacturer : JP Group Part Number : EQ 850100 BL / 1689801800 Porsche Equivalent Numbe r: 911 613 160 00 / 91161316000 911 613 160 01 70B / 9116131600170B

Sticker adjustment valve clearance Suitable for Porsche 911 2.0-3.3 Bj. 65-89, 914 1.7-2.0 year 69-76, 964 3.6 Bj. 12 / 88-07 / 90. Manufacturer: JP Group A / S Manufacturer number: 1601500106 Porsche reference number: 901 006 503 00

Cover for cable harness connector Suitable for Porsche 911 models from 1965 to 1989 Manufacturer : HT Manufacturer Part Number : 999 652 436 40 Porsche Equivalent Part Number : 999 652 436 40 / 99965243640

DME relay for the fuel pump Suitable for Porsche 911 Carrera 3,2 year of construction 1984 - 1989 Manufacturer : HT Manufacturer number : 91161815401 Porsche reference number : 911 618 154 00 / 91161815400 911 618 154 01 / 91161815401

Seal for vent cap Suitable for : - Porsche 911, model years 1965 - 1989 - Porsche 914, model years 1970 - 1976 - Porsche 964, model years 1989 - 1994 - Porsche 993, model years 1994 - 1998 Manufacturer : Reinz Manufacturer’s part number : 930 107 791 02 Porsche equivalent part number : 930 107 791 02 / 93010779102 930 107 791 00 / 93010779100

HT SET closure plug for air injection .incl sealing rings Suitable for Porsche 911 3.0 SC You will receive 6 plugs and 6 sealing rings. Manufacturer: HT

Safety bolt for clevis coupling cable Suitable for Porsche 356/911/912/914/930 Manufacturer: HT Porsche reference number: 999 166 001 02

Steering shaft bearing complete with bearing rubber and needle bearing The bearing rubber is provided with a dust protection at the top (see pictures). Suitable for Porsche 911 / 912 built between 1965-1989, 914 built between 1970 and 1976 Manufacturer: HT Manufacturer number: 91134704100 Porsche comparison number 911 347 041 00 Porsche comparison number needle bearing 911 347 029 00r Porsche comparison number bearing rubber 911 347 041 00

Ball joint / Suspension Joint Suitable for Porsche 911 / 930 Model years 1972 - 1989 The suspension joint features a wedge-shaped recess for the mounting bolt. Manufacturer : Lemförder Manufacturer Part Number : 12088 01 Porsche Equivalent Part Number : 911 341 049 01 / 91134104901 911 341 049 05 / 91134104905

Front Stabilizer Guide plate front Suitable for Porsche 911 year 1965 - 1973, Porsche 914 year 1970-1976. Manufacturer: HT Manufacturer number: 901 343 763 00 Porsche reference number: 901 343 763 00

Sliding ring for shift rod You will receive 1 sliding ring Suitable for : - Porsche 911 / 912 / 930 built between 1969 and 1986 (all 901 / 911 / 915 transmissions) - Porsche 914 built between 1969 and 1972 Manufacturer : HT Manufacturer number : 914 424 224 00 Porsche comparison number : 914 424 224 00 / 91442422400

The screw plug for the ski holder The diameter is approx. 24 mm Suitable for Porsche 911 Targa 2.0-3.3 11 / 64-07 / 89, Porsche 912 Targa 1.6 03 / 65-02 / 70, Porsche 964 Targa 3.6 12 / 88-09 / 93. Manufacturer: JP Group A / S Manufacturer number: 1680650100 Porsche reference number: 901 801 153 40