Heat exchanger steel Suitable for Porsche 911 66-75 without preheating Manufacturer: JP Group A / S Manufacturer number: 1623102370 / 91.011 Porsche reference number: 911 211 021 60

JP heat exchanger for Porsche 911 3.2 Carrera, Porsche 911 3.3 Turbo Suitable for Porsche - 911 Carrera year of construction: 1983-1989 - 911 Turbo Year of construction: 1983-1990 Manufacturer : JP Group A/S Manufacturer number : 91.104/ 1623103900 Porsche reference number : 930 211 029 01 / 93021102901

Exhaust metal band 648mm right, stainless steel Suitable for Porsche 911 year 84-89 Manufacturer: JP Group A / S Manufacturer number: 1621401180 Porsche reference number: 930 111 175 00

Dichtung für Wärmetauscher Verbindungsrohr / Verbindungsstutzen Innendurchmesser : 50 mm Außendurchmesser : 63 mm Passend für : - Porsche 911 Baujahr 1974 - 1989 - Porsche 911 Turbo Baujahr 1975 - 1989 Hersteller : HT Hersteller Nummer : 91111118903 Porsche Vergleichsnummer : 911 111 189 03 / 91111118903

Engine cover plate socket on the right Suitable for the air duct Suitable for Porsche 911 built between 1965 and 1973 For converting to the old heat exchanger on 3.0 / 3.2 Carrera Manufacturer: JP Group A/S Manufacturer number: 591192-2 Porsche comparison number: 911 106 327 00

Preheating hose for MFI The hose connects the nozzle from the heat exchanger to the engine cover plate Inner diameter 25x440mm Suitable for Porsche 911 2, 2 and 2.4 E and 5 Fits all 2.7 Carrera RS Year of construction 1969-1975 Manufacturer: HT Manufacturer number: 000 043 205 21 Porsche comparison number : 000 043 205 21

Elring transmission seal set Suitable for all Porsche 911 3.3 Turbo from model year 78 Manufacturer: Elring Manufacturer Number: 285.838 Porsche reference number: 930 300 911 00

Clutch hose on the clutch slave cylinder. Suitable for Porsche 911 Carrera from 1987-1989 Manufacturer: FTE Manufacturer number 911 423 177 03 Porsche reference number 911 423 177 03

ring gear Suitable for Porsche 911/964 Porsche 911 Carrera 3,2 with G50 gearbox year 1986 -1989 Porsche 964 C2 built in 1989 Manufacturer: SWAG Manufacturer number 950 116 143 05 Porsche comparison number 950 116 143 01/950 116 143 05

Dust cap replacement seal for tie rod The sealing sleeve is supplied with the 2 wire seals Suitable for Porsche 911/912 from 1965-1989 Manufacturer: HT Manufacturer number: without Porsche reference number: without

Washer / Steering stop disc Suitable for Porsche 911 built between 1974 and 1989 Manufacturer : HT Manufacturer number : 930 347 313 01 Porsche comparison number : 930 347 313 01 / 93034703101

Genuine Bilstein Rear Axle Shock Absorbers -Sporty Road- Suitable for all Porsche 911 / 930 2.4–3.2 L manufactured 08/71–07/89 Part Number : 336/164 Manufacturer : Bilstein Manufacturer Part Number : B 46-0975 / 24-009751

Lock washer anchor plate front axle Suitable for Porsche 911/912 year 1965-1968 Manufacturer: HT Manufacturer number: 901 351 481 11 Porsche reference number 901 351 481 11

Strut bar for the front axle in the trunk, Carbon look Suitable for Porsche 911, 912 and 930 built in 1969-1989 The strut brace is attached to the original fittings using the 2 retainers at the attachment points of the mandrel bearing. Manufacturer : JP Group Manufacturer number: EQ880102 / 1684000500 Porsche comparison number : without

Rubber mount for stabilizer, front Diameter [mm] 16 Required number of pieces 4 Suitable for Porsche 911 year 1973-1977 Manufacturer: JP Group A / S Manufacturer number: 1640600400 Porsche reference number: 911 343 792 02

Bushing / Bearing Sleeve for Front Axle Control Arm, Rear Suitable for all Porsche 911 models from 1965 to 1969 Manufacturer : JP Group Manufacturer part number : 1640200100 Porsche equivalent part number : 901 341 421 03 / 90134142103

Eccentric adjusting screw for rear axle strut Suitable for : - Porsche 911, model years 1974 - 1989 - Porsche 924 / 924S, model years 1976 - 1988 - Porsche 944 and 944S2, model years 1982 - 1991 - Porsche 968, model years 1992 - 1995 Manufacturer : HT Porsche part number : 911 333 303 00 / 91133330300 911 333 303 01 / 91133330301

Wheel bearing rear axle outside Dimensions 40 X 80 X 18mm Suitable for all 911 and 912 year 1965 - 1968 All with a short wheelbase SWB Manufacturer: HT Porsche reference number 90005203000

drive shaft Suitable for Porsche 911/912 built in 1965 - 1968 The flange diameter is 94.7 mm, total length 406 mm Fixing requires 6 screws M 8 Manufacturer: Spidan / GKN / Löbro Manufacturer number: 21803 Porsche reference number 901 332 026 10

Connecting line for master brake cylinder, right, front brake circuit. Suitable for : - Porsche 911 2.0-3.0 liters, built between 1967 and 1977. - Porsche 912 1.6 liters, built between 1967 and 1970. - Porsche 914 1.7-2.0 liters, built between 1969 and 1976 Manufacturer : JP Group Manufacturer number: 1661250300 Porsche comparison number : PCG 355 061 00 / PCG35506100

Gemo handbrake cable Suitable for Porsche 911 / 912 Suitable for year of construction 1965 -1968 Manufacturer: Gemo Manufacturer number: 424451 Porsche reference number: 901 424 551 12

Original spare part Handbrake - fixing spring / pressure spring Suitable for all Porsche 911 built 1970 -1989 Manufacturer : Porsche Porsche reference number : 901 352 957 10 / 90135295710

Sealing sleeve for shift linkage outside Suitable for all with G 50 gear Suitable for Porsche 911 3.2 Carrera year 1987-1989 Manufacturer: HT Manufacturer number: 950 424 294 06 Porsche reference number 950 4245 294 06

Turbo fender flares The widening fits the right rear side panel and is made of metal. Suitable for all Porsche 911 / 930 year of construction: 1975 to 1989 Manufacturer : JP Group Manufacturer number : 591384 Porsche reference number : 930 503 908 00 / 93050390800 Shipping as bulky goods