Brake pad set, front/rear Suitable for: - Porsche 911, model years 1969–1974, front - Porsche 911, model years 1969–1983, rear - Porsche 914, model years 1970–1976, rear Manufacturer: Textar Manufacturer number: 2003402 Porsche comparison number: 911 352 950 04 / 91135295004 914 352 903 01 / 91435290301

Multiple plug connector Suitable for Porsche 911 from 1969-1989 964 1989-1994 914 1970-1976 944 1985-1991 924 1986-1988 968 1992-1995 You get the plug. Suitable for the turn signals and headlights as well as the rear lights. Manufacturer: ÜRO Manufacturer number Porsche reference number 901 612 330 00

Rubber grommets / plugs The plug seals the brake line feed-through in the front and rear of the bodywork. You will receive 1 plug. 2 are required for a complete replacement! Suitable for all Porsche 911 / 912 / 930 models built between 1965 and 1989 Manufacturer : JP Group Manufacturer’s part number : 1661550100 Porsche equivalent part number : 914 355 651 00 / 91435565100

Standard Main Bearing Kit Suitabke for models from 1977 to 1998 - Porsche 911 3.0 / 3.2 / 3.3 Turbo - Porsche 964 - Porsche 993 You will receive the complete kit WITHOUT bearing 8 Manufacturer : Glyco Manufacturer Part Number : H949/7 STD Porsche Equivalent Part Number : 964 101 901 00 / 96410190100 930 101 901 00 / 93010190100

Original TRW intake valve Suitable for all Porsche 911 2.2 / 2.4 / 2.7 / 2.7 Carrera RS Manufacturer: TRW Manufacturer number: 3063 Valve head diameter: 46.0 mm Valve stem: 9.0 mm Valve stem: chrome-plated Valve stem end: hardened Total valve length: 114.6 mm Chrome-silicon steel Valve seat angle: 45 degrees Porsche comparison number: 911 105 411 20 / 91110541120 911 105 411 00 / 91110541100

Ball Joint Suitable for Porsche 911 / 930 Model years 1972 - 1989 The suspension joint features a wedge-shaped recess for the mounting bolt. Manufacturer : HT Manufacturer Part Number : 91134104901 Porsche Equivalent Number : 911 341 049 01 / 91134104901 911 341 049 05 / 91134104905

Cylinder head gasket Reinz Suitable for all Porsche 911 3.0 Ltr built in 1978-1983 95 mm bore Suitable for 180/188/200 and 204 hp The seal has a thickness of 2.6 mm The diameter is 102 mm Manufacturer: Reinz Manufacturer number: 61-24335-00 Porsche reference number 930 104 317 00

Poetry intake 2,0-2.4 Verg. 901 108 391 04 Suitable for Porsche 911 t/l built: 1965 - 1973 Suitable for Porsche 911 E year of construction: 1969 - 1973 Suitable for Porsche 914-6 year of construction: 1970 - 1972 Manufacturer: Reinz Manufacturer number: 71-22008-10 Porsche comparison number: 901108391004

Nozzle holder / Injection nozzle sleeve / Nozzle carrier / Fuel injection sleeve Suitable for Porsche 911 2.7 and 3.0 SC, model years 1974 - 1983 Manufacturer : HT Manufacturer’s part number : 91111088603 Porsche equivalent number : 911 110 886 03 / 91111088603

Nozzle holder O-ring Suitable for Porsche 911 built between 1974 and 1989 Manufacturer : HT Manufacturer number : 99970144640 Porsche comparison number : 999 701 446 40 / 99970144640

HT desk pad for impact pipe front or rear Suitable for Porsche 911 Bj. 74-89 Manufacturer: JP Group A/S Manufacturer reference number: 1685000500 Porsche reference number: 911 505 311 00

Bumpers Impact tube rubber stop, rubber for impact tube, rubber stop for bumper The rubber stop fits the front and rear impact tubes. You will receive 1 rubber stopper. Suitable for all Porsche 911 / 930 models built between 1974 and 1989 Manufacturer: HT Manufacturer number: 91150522100 Porsche comparison number: 911 505 221 00 / 91150522100

Reinforcement for door hinge / door stopper Suitable for Porsche 911 / 964 / 993 Suitable for model years 1965 - 1998 On some doors, the outer reinforcement plate may need to be modified. Manufacturer : HT Manufacturer Part Number : 91153795700RK Porsche Equivalent Number : 911 537 957 00 RK / 91153795700RK 911 537 957 00 / 91153795700

JP gas-pressure spring rear Suitable for all Porsche 911, 964 and 993 Bj. 65-98 Length: 260mm Stroke: 80mm Ejejt force: 370 N Manufacturer: JP Group A/S Manufacturer reference number: 1681200200 Porsche reference number: 911 512 331 02

Master brake cylinder complete with warning contact Suitable for Porsche 911 from 1965-1977 For all Porsche 911/914 with 2-circuit brake system Manufacturer: AIC Manufacturer Number: 56694 Porsche reference number 901 355 012 02

Tie rod set HT complete "Turbo version" This version is significantly more direct than the version with universal joint The set includes 2 tie rods, 2 bellows, and 2 stop washers Suitable for Porsche 911 model years 1969 - 1989 Manufacturer : HT Manufacturer number : 930 347 031 01 Porsche comparison numbers : Tie rod 930 347 031 01 / 93034703101 Bellows 930 347 191 02 / 93034719102 Stop washer 930 347 313 01 / 93034731301

Wheel bolt, burnished Thread : M14 X 1.5 Grade : 10.9 Thread length : 66 mm Suitable for : - Porsche 911 Turbo - All Porsche 911 models with spacers - Porsche 924 / 944, model years 1976-1985 You will receive 1 piece; 20 wheel bolts are required for a complete replacement. Manufacture r: Verbus Manufacturer number : 91133167100 Porsche comparison number : 911 331 671 00 / 91133167100

Windscreen washer pump Suitable for : - Porsche 911 built between 1965 - 1989 - Porsche 914 built between 1970 - 1976 - Porsche 928 built between 1978 - 1986 Manufacturer : HT Manufacturer number : 928 628 074 01 Porsche comparison number : 928 628 074 01 / 92862807401

Tappet tube / tappet guard tube / tappet rod, without gaskets, stainless steel Suitable for : - Porsche 356 A / B / C 1.6-liter, model years 01/1955 - 12/1965 - Porsche 912 1.6-liter, model years 01/1965 – 02/1970 Manufacturer : JP Group Manufacturer Part Number : 1611600300 Porsche Equivalent Number : 644 105 231 00 / 64410523100 PCG 105 231 00 / PCG10523100

Vibration damper for the oil cooler at the front of the wheel arch. Suitable for Porsche 911 3.2 Carrera, model years 1984 - 1989 Manufacturer : HT Manufacturer number : 930 207 239 02 Porsche comparison number : 930 207 239 02 / 93020723902

Synchro Tester / Synchro Tester for Carburetor Systems Compatible with various carburetor systems and twin-carburetor setups, such as Solex, Dellorto, Weber, SU, Zenith, Stromberg, etc. Synchro tester for vertical and horizontal use - the measuring tube is adjustable. Ring dimensions: max. 75 mm outer diameter / min. 35 mm inner diameter. The ring is made of soft sealing rubber and conforms very well to any surface. Simply place the synchronizer tester in position, and the values can be determined using the scale inside the measuring tube; then move on to the next intake, and so on. Manufacturer : JP Group Manufacturer Part Number : 8105000700 / AC129250

Drive shaft sleeve set Suitable for Porsche 911, model years 1974 to 1985 Suitable for drive shaft connection 100 mm / M8 x 6 pieces Height : 100 mm Inner diameter 1 : 21 mm Inner diameter 2 : 100 mm Manufacturer : SKF Manufacturer number : VKJP 6101 Porsche comparison number : 923 332 232 01/ 92333223201 944 331 90 300 / 94433190300

Adjustment Washer / Spacer Washer for Alternator Belt Tension Inner Diameter : 30 mm Suitable for Porsche 911, model years 1965 - 1989 Manufacturer : HT Manufacturer Part Number : 930 106 564 00 Porsche Equivalent Part Number : 930 106 564 00 / 93010656400

Seal for oil strainer Suitable for Porsche 911, model years 1965 - 1983 Manufacturer : Reinz Manufacturer number : 70-21284-20 Porsche reference number : 930 101 391 01 / 93010139101