Brake caliper SET Rear axle, left and right Suitable for : - Porsche 911 built between 1969 and 1983 - Brake disc 20 mm Piston diameter : 38 mm Manufacturer: Bugiad Manufacturer numbe r: 91135290700 / 91135290800 Porsche comparison number : 911 352 907 00 / 91135290700 911 352 908 00 / 91135290800 EAN number : 5705444047318 5705444047325

Stabilizer - Strut / Coupling Rod Left The stabilizer rod for the rear axle stabilizer on the left, complete with mounting screws and lock nuts. Suitable for Porsche 911 3.0 and 3.2 Carrera Suitable for model years 1978 - 1989 Manufacturer : HT Manufacturer number : 930 333 071 00 Porsche comparison number : 930 333 071 00 / 93033307100

JP Sport Air Filter Element Replacement air filter element for 1618601700. Now you can replace the filter element without having to replace the entire unit. Compatible with SOLEX carburetors. Fits: - Porsche 356 A/B/C, model years 1955–1965, 1.5 + 1.6 liters - Porsche 912, model years 1965–1970, 1.6 liters Manufacturer: JP Group Manufacturer Part Number: 1618602500 Porsche Equivalent Number: 616 108 203 01 / 61610820301

Rocker arm for clutch release lever Fits Porsche 911 and 3.0 Turbo Model years 1972–1977 Fits Porsche 914 Model years 1970–1976 Manufacturer: Hamburg-Technic Porsche part number 911 423 205 03

Ball joint / ball joint Suitable for Porsche 911/914 built in 1969 - 1971 Manufacturer: Bugiad Manufacturer number: 901 341 049 00 Porsche referencenumber 901 341 049 00

HT washer clamping nut axle bearing front Suitable for Porsche 911 Year: 1970-1989 Suitable for Porsche 911 T Year: 1975-1977 Suitable for Porsche 924 Year: 1976-1985 Suitable for Porsche 924S Year: 1986-1988 Suitable for Porsche 928 Year: 1978-1995 Suitable for Porsche 944 Year: 1982-1991 Suitable for Porsche 968 Year: 1992-1995 Manufacturer: HT Manufacturer Part Number: 911 341 663 00 Porsche Reference Number: 91134166300

Seat belt with mounting bracket and long strap Black with E-approval Suitable for Porsche 911 models from 1969–1973 Manufacturer : S-Trim

Replacement trim for the sill trim under the door, wide For the S sill trim Suitable for Porsche 911 / 912 Fits the left or right side Manufacturer : TMP Porsche part number : 901 559 106 52 / 90155910652

Blower motor / ventilation motor / fan motor The engine fits the fresh air blower in the trunk. Suitable for Porsche 911/930 from 1969-1989 914 year 1970-1976 Manufacturer: AIC Manufacturer number 56941 Porsche reference number -without-

Sun visor set, black left/right Suitable for Porsche 911 Targa, model years 69-77 Manufacturer: S-Trim Porsche comparison number: 911 731 031 42

Foam for backrest, right or left side Suitable for Porsche 911 / 912, model years 1965 - 1972 Manufacturer : S-Trim Manufacturer number : 90152150522 Porsche comparison number : 901 521 505 22 / 90152150522

Dashboard / Dashboard cover, black with speaker grille Suitable for all Porsche 911 model years 1968 - 1973 Manufacturer : S-Trim Porsche comparison number : 911 552 031 00 / 91155203100 Shipped as bulky goods

Strut Mount / Strut Bearing, front axle The bearing is supplied complete with mounting bolts, lock washers, single-hole and double-hole plates, and mounting nuts for the shock absorbers. Suitable for : - Porsche 911, model years 1969-1998 - Porsche 911 T/ E / S / SC and all Carrera and Turbo models Manufacturer : HT Porsche part number : 911 341 018 00 / 91134101800

Cibie Repro mounting ring / mounting ring The ring is delivered with the 4 clips for the reflector. Manufacturer unknown / repro The mounting ring connects the housing to the reflector. Suitable for Porsche 911 with Cibie and Renault DS

Injector Seal Kit / Fuel Injector Gasket Kit Set for 4 injectors Fits Porsche 911 / 924S / 928 / 944 Manufacturer : Bosch Part Number : 1 287 010 704 Porsche Equivalent Number : 944 110 901 00 / 94411090100

Hood latch (upper part, front), yellow-galvanized Fits Porsche 911 / 912 Fits model years 1965–1973 Manufacturer: JP Group Manufacturer part number: 1687700100 Porsche equivalent part number: 901 511 051 21 / 90151105121

Front Axle Wheel Bearing Oil Seals / Shaft Seals Set of 2 pieces For front axle wheel hubs Suitable for Porsche 356 / 911 / 912, model years 1950 - 1989 Manufacturer : Reinz Manufacturer part number : 99911307750 Porsche equivalent part number : 999 113 077 50 / 99911307750

Bilstein shock absorber set front axle and rear axle, model: sporty road. Suitable for Porsche 911 year 1974 - 1989 You get the complete set with 2 pieces damper for the front axle and 2 pieces damper for the rear axle. The dampers are supplied complete with the mounting kit. Manufacturer: Bilstein Manufacturer number Front axle 34-001158 / P36-0115 Rear axle 24-009751 / B46-0975

Carpet trim strip, black ribbed SET of 2 pieces Suitable for Porsche 911 / 930, model years 1974 - 1989 Manufacturer : TMP Porsche Equivalent Part Number : 901 551 419 28 / 90155141928

Drive shaft bolt / Drive shaft bolt assembly / Bolt for drive shaft / Cylindrical bolt You will receive 12 M8 x 45 fixing bolts. Fits drive shafts with the thick flange only. Please check the length before purchasing! Suitable for Porsche 911 2.7 / 3.0 / 3.2 Suitable for models built between 1975 and 1986, gearbox type 915.67 / 68 Manufacturer: Schek Manufacturer’s part number: 90006721109 Porsche equivalent number: 900 067 211 09 / 90006721109

Cylinder head bolts / Steel bolts / Stud bolts / Steel studs / Cylinder head stud bolts, for the crankcase and cylinder head Set of 12 Suitable for Porsche 911 model year 1965 - 1998 Manufacturer : HT Manufacturer’s part number : 993 101 170 53 Porsche equivalent part number: 99310117051 / 99310117051 99310117053 / 99310117053

Axle tube bolts / mountings, for axle tube bearing caps Set of 4 pieces The bolts must be welded into the bodywork and are threaded for securing the bearing cap Suitable for Porsche 911 / 912, model years 1965 - 1989 Manufacturer : Noel Manufacturer’s part number : none

Bearing caps for rear axle struts / axle swords, complete set with rubber bushings Set contains 2 bearing caps and 4 rubber bushings The bearing caps are suitable for Porsche 911 / 930 model years 1965 - 1989 Manufacturer : Stilcars Manufacturer’s part number : 901 333 153 00 / 901 333 195 00 Porsche equivalent part numbers : Bearing cap 901 333 153 00 / 90133315300 Bearing rubber 901 333 195 00 / 90133319500

Connecting rod bearings / connecting rod bearing set Oversize : 0.50 You will receive the complete set of 12 bearing shells +0.50 Suitable for : - Porsche 911 3.2 Carrera built between 1984 and 1989 - All Porsche 964 and 3.3 Turbo models built between 1989 and 1993 Manufacturer : Glyco Manufacturer number : 71-3427/6 +0.50 Comparison number : 930 103 147 60 / 93010314760