Reinz gasket set for oil strainer KIT This set includes 2 gaskets, 10 aluminum sealing washers, and 10 M6 self-locking nuts Suitable for : - Porsche 356 A / B / C - Porsche 912 Manufacturer : Reinz Manufacturer Part Number : 539 01 152 Porsche Equivalent Part Number : 539 01 152 / 53901152

Rubber Bearings for Wheel Carrier SET Rear Axle Suitable for Porsche 928 Year: 1978-1995 You will receive 2 pieces. Manufacturer: HT Porsche comparison number: 928 331 588 15

Stabiliser mounting Suitable for Porsche 964 C2 and Turbo built in 1989-1993 Fits the front axle, left and right You will receive the set 2 pieces Manufacturer: HT Manufacturer number: 96434307101/96434307201 Porsche comparison number: 964 343 071 01/964 343 072 01

SET Connecting line for master brake cylinder, right, front brake circuit/connecting line for master brake cylinder, left, rear brake circuit Suitable for : - Porsche 911 2.0-3.0 liters, built between 1967 and 1977 - Porsche 912 1.6 liter, built between 1967 and 1970 - Porsche 914 1.7-2.0 liter, built between 1969 and 1976 Manufacturer : JP Group Manufacturer number : 1661250300/1661250400 Porsche comparison number : PCG 355 061 00 / PCG35506100 PCG 355 063 00 /PCG35506300

Front window trim frame black Suitable for Porsche 911/912 You will receive the complete sentence. Decorative frame right and left incl. 2 connectors. Manufacturer: APA Manufacturer number: without Porsche comparison number: 1 x decorative frame half right 911 541 911 01 70K 1 x decorative frame halves left 911 541 912 01 70K 2 x cover plate / connector 911 541 921 01 70K

Mounts / Clips for Sill Trim Panels The clips are installed in the sill trim Set of 10 pieces Suitable for all Porsche 964 / 965 Turbo models from 1989 to 1994 Manufacturer : HT Manufacturer Part Number : 99959191640 Porsche Equivalent Number : 999 591 916 40 / 99959191640

Clips and grommets for the side sill trim The grommets are mounted on the sides of the body, while the clips are installed in the side sill trim. The set includes 10 clips and 10 grommets. Compatible with: - All Porsche 964 / 965 Turbo models from 1989 to 1994 - Porsche 968 models from 1992 to 1995 Manufacturer: HT Manufacturer Part Number: 99970216040 / 99959191640 Porsche equivalent numbers: 999 702 160 40 / 99970216040 999 591 916 40 / 99959191640

Rear axle wheel bearing set for 1 wheel with the two sealing rings and a split pin. Two sets are required for both sides! Suitable for Porsche 356B year of construction 1960 - 1965 Manufacturer : JP Group Manufacturer number : 8151300110 Porsche reference numbers : - Deep groove ball bearing : 900 052 006 00 / 90005200600 - Sealing ring : 356 34 144 / 35634144 - Sealing ring : 113 501 315 H / 113501315H - Split pin : 900 021 025 02 / 90002102502

Repro brake caliper front left Suitable for Porsche 356 and 911 / 912 years 1963-1968 Piston diameter 38mm Brake disc thickness suitable for 10mm solid disc Manufacturer: CPS Porsche comparison number: 901 351 965 10 / 901 351 965 11

Noel accessory kit for brake shoes 40mm Suitable for Porsche 356 A/B Bj. 50-62 Manufacturer: Noel Manufacturer reference number: 35642001 Porsche reference number: 356 42 001

Brake hose 370 mm front Suitable for Porsche 356A-C/SC/Super90 year 58-65 Manufacturer : JP Group A/S Manufacturer number: 8161600400 Porsche reference number: 644 42 311

Door handle seal small Suitable for all Porsche 356 A / B / C year 60-65 Manufacturer:HT Manufacturer number: 644 531 632 00 Porsche reference number: 644 531 632 00

Door rubber pad Suitable for Porsche 356 A / B / C year 60-65 Manufacturer: HT Manufacturer number: 64453163100 Porsche reference number: 644 531 631 01

Decorative strip for door sills with piping and decorative rubber Suitable for all Porsche 356 B/C year 1960-1965 Manufacturer : TMP Manufacturer number: 9166 Porsche reference number: PCG 559 011 07

Protection plate rear axle Suitable for Porsche 911 and 912 from 1965-1968 The sheet fits for the bottom left or top right Manufacturer: JP Group A / S Manufacturer Number: 1664300300 Porsche reference number: 901 352 801 16

Protection plate rear axle Suitable for Porsche 911 and 912 from 1965-1968 The sheet fits for the top left or bottom right Manufacturer: JP Group A / S Manufacturer Number: 1664300400 Porsche reference number: 901 352 802 16

Intake manifold gasket Diameter: 3.7cm Suitable for Porsche 911 2.0 S carburetor 911 2.2 and 2.4 p 911 2.7 RS with MFI Suitable for Porsche 911 year 1965 - 1973 Manufacturer: Reinz Manufacturer number: 70-21903-10 Porsche reference number: 901 108 391 05

Mahle Piston Suitable for Porsche 911 2.4 T built 1972 - 1973 Bore 84 mm You will receive a piston with piston rings and piston bolts and piston bolt locking ring Manufacturer: Mahle Manufacturer number 503 18 00

Mahle piston Suitable for Porsche 911 2.4 S year 1972 - 1973 Manufacturer: Mahle Manufacturer number: 503 01 00 84 mm bore You get 1 piston with piston rings and piston pin. 6 pieces are required for a complete replacement.

Cylinder 2,2 / 2,4 nikasil Suitable for Porsche 911 2,2 S , year 9 / 69 -12/ 71 911 S year 9 / 69 -12/ 71 Bore 84,00 mm / 180 PS Manufacturer : Mahle Manufacturer reference number : 503 WR 19 Porsche reference number : none

Mahle Piston and Cylinder Repair Kit for Porsche 911 Set includes 1 piston with piston rings, piston pins, and piston pin retaining rings Suitable for Porsche 911 3.0-liter 180 / 188 / 3.0 Carrera 200 PS Compatible with engine numbers 930.02 / 930.03 / 930.09 / 930.12 / 930.13 Cylinder bore : 95.0 mm The cylinders are Nikasil-coated. Manufacturer : Mahle Manufacturer part number : 503 71 92 / 5037192 Porsche equivalent part number : 930 103 962 05 / 93010396205

Mahle piston Suitable for Porsche 911 3.3 Turbo built 1977 - 11 / 1990th 282- 330 HP Compaction 7.0: 1, bore 97.0 mm Manufacturer: Mahle Manufacturer number 503 98 00 The piston is inclusive piston rings, piston pin and piston pin securing ring. You get 1 piece of pistons.

Mahle aluminum cylinder Suitable for Porsche 911 3.3 Turbo Cylinder bore [mm] 97,000 mm Outer diameter [mm] 103,000 mm Length [mm] 119,700 mm Flange Ø [mm] 113,000 mm Surface NiSiC (Nikasil®) coated Manufacturer: MahleManufacturer number: 503 WR 26 Porsche comparison number 930 104 122 02

Piston Rings Set Suitable for Porsche 911 2.7 RS year 74-77 Dimensions: 1.5 / 1.5 / 4.0mm - bore 90mm You will receive a set with 3 piston rings Manufacturer: Götze Manufacturer number: 08-319700-10 Porsche reference number: 911 103 934 00