Lock washer anchor plate front axle Suitable for Porsche 911/912 year 1965-1968 Manufacturer: HT Manufacturer number: 901 351 481 11 Porsche reference number 901 351 481 11

Strut bar for the front axle in the trunk, Carbon look Suitable for Porsche 911, 912 and 930 built in 1969-1989 The strut brace is attached to the original fittings using the 2 retainers at the attachment points of the mandrel bearing. Manufacturer : JP Group Manufacturer number: EQ880102 / 1684000500 Porsche comparison number : without

Rubber mount for stabilizer, front Diameter [mm] 16 Required number of pieces 4 Suitable for Porsche 911 year 1973-1977 Manufacturer: JP Group A / S Manufacturer number: 1640600400 Porsche reference number: 911 343 792 02

Bushing / Bearing Sleeve for Front Axle Control Arm, Rear Suitable for all Porsche 911 models from 1965 to 1969 Manufacturer : JP Group Manufacturer part number : 1640200100 Porsche equivalent part number : 901 341 421 03 / 90134142103

Eccentric adjusting screw for rear axle strut Suitable for : - Porsche 911, model years 1974 - 1989 - Porsche 924 / 924S, model years 1976 - 1988 - Porsche 944 and 944S2, model years 1982 - 1991 - Porsche 968, model years 1992 - 1995 Manufacturer : HT Porsche part number : 911 333 303 00 / 91133330300 911 333 303 01 / 91133330301

Wheel bearing rear axle outside Dimensions 40 X 80 X 18mm Suitable for all 911 and 912 year 1965 - 1968 All with a short wheelbase SWB Manufacturer: HT Porsche reference number 90005203000

drive shaft Suitable for Porsche 911/912 built in 1965 - 1968 The flange diameter is 94.7 mm, total length 406 mm Fixing requires 6 screws M 8 Manufacturer: Spidan / GKN / Löbro Manufacturer number: 21803 Porsche reference number 901 332 026 10

Connecting line for master brake cylinder, right, front brake circuit. Suitable for : - Porsche 911 2.0-3.0 liters, built between 1967 and 1977. - Porsche 912 1.6 liters, built between 1967 and 1970. - Porsche 914 1.7-2.0 liters, built between 1969 and 1976 Manufacturer : JP Group Manufacturer number: 1661250300 Porsche comparison number : PCG 355 061 00 / PCG35506100

Gemo handbrake cable Suitable for Porsche 911 / 912 Suitable for year of construction 1965 -1968 Manufacturer: Gemo Manufacturer number: 424451 Porsche reference number: 901 424 551 12

Original spare part Handbrake - fixing spring / pressure spring Suitable for all Porsche 911 built 1970 -1989 Manufacturer : Porsche Porsche reference number : 901 352 957 10 / 90135295710

Sealing sleeve for shift linkage outside Suitable for all with G 50 gear Suitable for Porsche 911 3.2 Carrera year 1987-1989 Manufacturer: HT Manufacturer number: 950 424 294 06 Porsche reference number 950 4245 294 06

Turbo fender flares The widening fits the right rear side panel and is made of metal. Suitable for all Porsche 911 / 930 year of construction: 1975 to 1989 Manufacturer : JP Group Manufacturer number : 591384 Porsche reference number : 930 503 908 00 / 93050390800 Shipping as bulky goods

Support tube for rear bumper corner Suitable for all Porsche 911 / 912 models built between 1974 and 1989 Suitable for left and right sides Manufacturer : JP Manufacturer number : 591189-1 Porsche comparison number : 911 501 623 02 / 91150162302

Front part of wheel housing left Suitable for all Porsche 911 year 74-89 Manufacturer: JP Group A / S Manufacturer number: 1682351170 / 591143-1 Porsche reference number: 911 501 967 00

Repair panel, front right wheel arch Suitable for Porsche 911 / 912 Suitable for model years 1965 - 1968 Manufacturer: JP Group A/S Manufacturer number: 1688251180 Porsche comparison number: 901 501 974 20

Repair panel, wheel housing, front left NEW Suitable for Porsche 911/912 year 1965 - 1971 Manufacturer: JP / Dansk Manufacturer No. 590943-1

Bracket for front bumper molding on front closing panel, metal Suitable for Porsche 911 year 65-73 Manufacturer: JP Group A/S Manufacturer number: 1684350600 / 591024-1 Porsche reference number: 901 501 310 20

End bush / cover for torsion bar left / right Suitable for Porsche 911 year 65-89 Manufacturer: JP Group Manufacturer number: 1682000800 / 591053-1 Porsche reference number: 911 331 010 00

Terminal set with 2 clamping half-shells and the 2 connecting screws. Suitable for all Porsche 911 and 912 built between 1965 and 1968 SWB Manufacturer: Noel Porsche reference number: 902 635 115 20

Parcel shelf mounting bracket Suitable for Porsche 911 year 65-71 Manufacturer: Rest Design Manufacturer number: P221S Porsche reference number:-

Trim strip for bumper / Rear bumper seal for bodywork / Rear bumper seal, rear, right and left Suitable for Porsche 911 / 912, model years 1965 - 1968 Manufacturer : TMP Manufacturer’s part number : 9474 Porsche equivalent part number : 901 505 092 20 / 90150509220

Lock cylinder with 2 keys Suitable for Porsche 911 / 912 Suitable for model years 1965 - 1967 Manufacturer: JP Group A/S Manufacturer number: 1687150600 Porsche comparison number: 901 531 651 20

Door handle with lock cylinder, chrome, left, complete with unlocking mechanism and 2 keys. Suitable for Porsche 911/912, model years 1965–1968. Manufacturer : JP Group Manufacturer number : 1687100970 Porsche comparison number : 901 531 061 20 / 90153106120

Door handle with lock cylinder, chrome, right, complete with unlocking mechanism and 2 keys. Suitable for Porsche 911/912, model years 1965–1968. Manufacturer: JP Group Manufacturer number: 1687100980 Porsche comparison number: 901 531 062 20 / 90153106220