Standard Main Bearing Kit Suitabke for models from 1977 to 1998 - Porsche 911 3.0 / 3.2 / 3.3 Turbo - Porsche 964 - Porsche 993 You will receive the complete kit WITHOUT bearing 8 Manufacturer : Glyco Manufacturer Part Number : H949/7 STD Porsche Equivalent Part Number : 964 101 901 00 / 96410190100 930 101 901 00 / 93010190100

Original TRW intake valve Suitable for all Porsche 911 2.2 / 2.4 / 2.7 / 2.7 Carrera RS Manufacturer: TRW Manufacturer number: 3063 Valve head diameter: 46.0 mm Valve stem: 9.0 mm Valve stem: chrome-plated Valve stem end: hardened Total valve length: 114.6 mm Chrome-silicon steel Valve seat angle: 45 degrees Porsche comparison number: 911 105 411 20 / 91110541120 911 105 411 00 / 91110541100

Cylinder head gasket Reinz Suitable for all Porsche 911 3.0 Ltr built in 1978-1983 95 mm bore Suitable for 180/188/200 and 204 hp The seal has a thickness of 2.6 mm The diameter is 102 mm Manufacturer: Reinz Manufacturer number: 61-24335-00 Porsche reference number 930 104 317 00

Poetry intake 2,0-2.4 Verg. 901 108 391 04 Suitable for Porsche 911 t/l built: 1965 - 1973 Suitable for Porsche 911 E year of construction: 1969 - 1973 Suitable for Porsche 914-6 year of construction: 1970 - 1972 Manufacturer: Reinz Manufacturer number: 71-22008-10 Porsche comparison number: 901108391004

Nozzle holder / Injection nozzle sleeve / Nozzle carrier / Fuel injection sleeve Suitable for Porsche 911 2.7 and 3.0 SC, model years 1974 - 1983 Manufacturer : HT Manufacturer’s part number : 91111088603 Porsche equivalent number : 911 110 886 03 / 91111088603

Nozzle holder O-ring Suitable for Porsche 911 built between 1974 and 1989 Manufacturer : HT Manufacturer number : 99970144640 Porsche comparison number : 999 701 446 40 / 99970144640

Tappet tube / tappet guard tube / tappet rod, without gaskets, stainless steel Suitable for : - Porsche 356 A / B / C 1.6-liter, model years 01/1955 - 12/1965 - Porsche 912 1.6-liter, model years 01/1965 – 02/1970 Manufacturer : JP Group Manufacturer Part Number : 1611600300 Porsche Equivalent Number : 644 105 231 00 / 64410523100 PCG 105 231 00 / PCG10523100

Vibration damper for the oil cooler at the front of the wheel arch. Suitable for Porsche 911 3.2 Carrera, model years 1984 - 1989 Manufacturer : HT Manufacturer number : 930 207 239 02 Porsche comparison number : 930 207 239 02 / 93020723902

Synchro Tester / Synchro Tester for Carburetor Systems Compatible with various carburetor systems and twin-carburetor setups, such as Solex, Dellorto, Weber, SU, Zenith, Stromberg, etc. Synchro tester for vertical and horizontal use - the measuring tube is adjustable. Ring dimensions: max. 75 mm outer diameter / min. 35 mm inner diameter. The ring is made of soft sealing rubber and conforms very well to any surface. Simply place the synchronizer tester in position, and the values can be determined using the scale inside the measuring tube; then move on to the next intake, and so on. Manufacturer : JP Group Manufacturer Part Number : 8105000700 / AC129250

Adjustment Washer / Spacer Washer for Alternator Belt Tension Inner Diameter : 30 mm Suitable for Porsche 911, model years 1965 - 1989 Manufacturer : HT Manufacturer Part Number : 930 106 564 00 Porsche Equivalent Part Number : 930 106 564 00 / 93010656400

Seal for oil strainer Suitable for Porsche 911, model years 1965 - 1983 Manufacturer : Reinz Manufacturer number : 70-21284-20 Porsche reference number : 930 101 391 01 / 93010139101

Hex nut nut for rocker arm adjusting screw Suitable for Porsche 911 2.0-3.2 year 65-89, for Porsche 964 year 89-94. Manufacturer: HT Manufacturer number: 99903400500 Porsche reference number: 999 034 005 00

Cylinder base gasket 0.50 mm NEW They offer 6 seals on the set Suitable for Porsche 911 from 1965 - 1973 Suitable for 2.0 / 2.2 and 2.4 liters Hole 80 or 84 mm Manufacturer: Reinz The rings have the dimension Inside: 92.20 mm Outside: 103.00 mm Thickness 0.50 mm Reference number Porsche 999 104 192 02

Original TRW exhaust valve Suitable for all Porsche 911 3.0 SC and 3.2 Carrera year 7 / 1977-8 / 1989. Valve disc diameter 41.5 mm, valve stem 9.0 mm chrome-plated valve stem, hardened valve stem end. Total valve length 108.4 mm, valve seat angle 45 degrees Chrome-manganese-nickel steel, valve seat armored. Manufacturer: TRW Manufacturer number 3051 Porsche reference number 930 105 419 51

Complete set of center shaft bearings, without flange Fits all Porsche 911 / 964 / 993 models from 1968 onward The set includes 2 bearing shells without flange Manufacturer : Glyco Part Number : 02-8030 Porsche Equivalent Number : 901 101 135 00 / 90110113500 993 101 137 00 / 99310113700 996 101 435 70 / 99610143570

Suction hose connecting hose oil tank to oil cooler Suitable for Porsche 911 from 1973 - 1989 Manufacturer: JP Group A / S Manufacturer number 1613701700 Porsche reference number: 911 107 233 00

Pulley / V-belt pulley half for alternator Suitable for - Porsche 911 - Porsche 911 SC without air pump - Porsche 911 all 3.2 Carrera without air conditioning Manufacturer: HT Manufacturer number: 930 106 209 02 Porsche comparison number: 930 106 209 02 / 93010620902

Camshaft Gasket / Camshaft Cover Gasket / Camshaft Flange Gasket / Camshaft Flange Gasket Suitable for Porsche 911 / 964 / 993, model years 1965–1998 Manufacturer : Reinz Manufacturer Part Number : 70-24285-20 Porsche Equivalent Numbers : 930 105 197 05 / 93010519705 930 105 197 01 / 93010519701 901 105 197 00 / 90110519700

Chain tensioner repair kit for 1 mechanical chain tensioner Suitable for Porsche 911 year 1974 - 1983, Porsche 914-6 year 1970 -1972. Manufacturer: HT Manufacturer number: 911 105 901 01 Porsche reference number: 911 105 901 01

Ignition cable holder for throttle valves, fuel injection system. The ignition cable holder is mounted on the throttle valves of the mechanical fuel injection system. Holder for ignition cables and fuel injection lines. Suitable for Porsche 911 / 2.0 / 2.2 / 2.4 E, S, and 2.7 Carrera RS Manufacturer: QSC Manufacturer number: 91611033000 Porsche comparison number: 916 110 330 00 / 91611033000

Bushing for throttle linkage / redirection of pedals Suitable for Porsche 911 year 1970-1994 Manufacturer: HT Manufacturer number: 901 423 253 00 Porsche reference number: 901 423 253 00

Steel bolt / stud bolt crankcase cylinder head / stud bolt for cylinder head The stud is made of SCM440 Dacromet Drage 12.9 Total length 163.5 mm Cylinder head bolt for crankcase, 12 pieces required. Note: Porsche 911 2.7L Carrera 1973 - 24 pieces required Suitable for : - Porsche 911 2.0-3.3 liter, year of construction 10/64-07/89 - Porsche 964 3.3-3.6 liter, year of construction 12/88-06/94 - Porsche 993 3.6-3.8 liter, year of construction 10/93-09/97 Manufacturer : JP Group Manufacturer number : 1610100100 Porsche reference number : 911 101 172 00 / 91110117200

Heat Exchanger Gasket You need 3 gaskets for 1 heat exchanger! Suitable for : - Porsche 911, model years 1965 - 1973 - 911S, model year - 1976 Manufacturer : Elring Manufacturer Part Number : 045.332 Porsche Equivalent Part Number : 901 11 195 00 / 90111119500

Nut for rocker arm shaft 12 pieces are needed for a complete replacement! Suitable for : - Porsche 911, model years 1970–1989 - Porsche 914, model years 1970–1976 - Porsche 964, model years 1989–1994 Manufacturer : HT Manufacturer part number : 901 105 376 02 Porsche equivalent part number : 901 105 376 02 / 90110537602