Adjustment Washer / Spacer Washer for Alternator Belt Tension Set of 5 pieces Inner Diameter : 30 mm Suitable for Porsche 911, model years 1965 - 1989 Manufacturer : HT Manufacturer Part Number : 930 106 564 00 Porsche Equivalent Part Number : 930 106 564 00 / 93010656400

Gasket between crankshaft and flywheel Suitable for : - Porsche 356 all model years - Porsche 912 all model years Manufacturer : Reinz Manufacturer number : 70-11201-00 Porsche comparison number : 502 02 301 / 50202301

Reinz Seal Kit for Chain Case Cover (Right/Left) Suitable for : - Porsche 911, model years 1974 - 1989 - Porsche 914, model years 1970 - 1976 - Porsche 964, model years 1989 - 1994 Manufacturer : Reinz Manufacturer Part Number : 93010519204 93010519103 Porsche Equivalent Number : 930 105 191 03/93010519103 930 105 192 04/93010519204

Mahle Aluminum Cylinder Block Bore : 90 mm Suitable for Porsche 911 2.7 RS / 2.7 K-Jetronik Suitable for 2.7-liter engines with 150 hp / 165 hp / 175 hp / 210 hp Manufacturer : Mahle Manufacturer Part Number : 503 WR 24 / 503WR24 The cylinder is Nikasil-coated. Porsche Equivalent Number : 91110411190 / 91110411190

Oil line / oil hose Suitable for Porsche 911 / 930 built between 1969 and 1989 The oil line from the engine block to the camshaft housing for all engines with hydraulic chain tensioners - or engines, that have been retrofitted with hydraulic tensioners. Manufacturer : JP Group Manufacturer number : 93010734714 / 93010734705 Porsche comparison number : 930 107 347 14 / 93010734714 930 107 347 03 / 93010734703

Oil line / oil hose NEW The oil lines from the engine block to the camshaft housing on the left Suitable for Porsche 911 Year of construction 1965-1983 Manufacturer: Cohline Porsche reference number left 901 107 347 01/901 107 347 02

Seal for vent cap Suitable for : - Porsche 911, model years 1965 - 1989 - Porsche 914, model years 1970 - 1976 - Porsche 964, model years 1989 - 1994 - Porsche 993, model years 1994 - 1998 Manufacturer : Reinz Manufacturer’s part number : 930 107 791 02 Porsche equivalent part number : 930 107 791 02 / 93010779102 930 107 791 00 / 93010779100

HT SET closure plug for air injection .incl sealing rings Suitable for Porsche 911 3.0 SC You will receive 6 plugs and 6 sealing rings. Manufacturer: HT

SET Oil hose for inlet on front left oil cooler and short oil hose for front right oil cooler. You will receive 2 pieces. The hose connects the oil cooler under the fender to the oil line under the sill. The long hose has a length of approx. 230 mm The short hose has a length of approx. 180 mm Suitable for Porsche 911 built between 1974 and 1989 Manufacturer : HT/ HT Manufacturer number : 93020711150 / 93020711304 Porsche comparison number : 930 207 111 05 / 93020711105 930 207 113 04 / 93020711304

Sealring for crankshaft bearing 8 Dimension 30 X 50 X 10 Suitable for Porsche 911 year 1965-1998 Manufacturer : Elring Manufacturer number: 347.922 Porsche reference number: 999 113 290 41

Oil strainer cover Suitable for Porsche 911 / 930 built between 1965 and 1983 Suitable for all 2.2 - 3.0 liter engines For conversion to the large 3.2 Carrera oil pump with strainer. Manufacturer : HT Manufacturer number : 93010190200 Porsche comparison number : 930 101 902 00 / 93010190200

Pulley half/ V-belt pulley half for alternator Suitable for Porsche 911 from 1965-1976 Manufacturer: HT Manufacturer number Porsche reference number 901 603 421 01

Replacement hub for fan wheel / impeller The spare wheel is supplied with the 6 aluminum rivets for mounting. You get the hub, not the fan wheel. Suitable for Porsche 911 2.0 / 2.2 / 2.4 / 2.7 year 1965 - 1976 Manufacturer : HT Manufacturer number : 901 650 760 00 Porsche comparison number : 901 650 760 00 / 90165076000

Oil line / oil hose for chain housing Suitable for Porsche 911 / 930 year of construction 1969 - 1989 The oil line from the engine block to the camshaft housing on the right for all engines with hydraulic chain tensioners. Or the engines that have been retrofitted with hydraulic tensioners. Manufacturer : JP Group Manufacturer number: 1613700880 Porsche reference number : 930 107 348 11 / 93010734811 930 107 348 12 / 93010734812

Support / bracket for the oil line in the rear wheel arch Suitable for Porsche 911 3.0SC and 3.2 year Manufacturer: HT Manufacturer number: 91120723700 Porsche reference number: 911 207 237 00

Fastening set Mounting set for the oil tank complete The set is suitable for Porsche 911 year: 1965-1989 Manufacturer: Stilcars 2 external sealing washers 901 107 692 00 2 sealing washers inside 901 107 693 01 2 flanging washers 901 107 661 00 2 steel washers 8.4 900 151 008 02 2 self-locking nuts yellow M8 900 151 004 02 Porsche comparison number: 90110769200/90110769301/ 90110766100

Mahle Piston and Cylinder Assemblies Repair Kit Suitable for Porsche 911 2.7 K-Jetronik 165 / 175 hp The pistons are incl. piston rings, piston pins and piston pin retaining rings. Manufacturer: Mahle Manufacturer Part Number: 5035992 Bore 90.00 mm 150 PS Compression 8.5 : 1 You will receive 1 Assy with 1 piston and 1 cylinder each, as well as 1 piston pin and 2 retaining rings. Porsche comparison number: PCG5035992

Conrod bearing / conrod bearing set Suitable for Porsche 911 from 1972-1977 Suitable for all 2.4 / 2.7 and 3.0 Carrera You will receive the complete set of standard Manufacturer: Glyco Manufacturer Number: 71-3014 / 6 Porsche reference number 914 103 141 00

Noel connecting rod bolt 911 Suitable for Porsche 911 2,0 L Bj. 65-69 Manufacturer: Noel Porsche reference number: 901 103 172 00

Dilavar Stud Bolts / Threaded Pins (12-Pack) Suitable for Porsche 911 / 964 / 993 This set includes 12 Dilavar stud bolts Manufacturer : Ruia Global Fasteners Part Number : 993 101 170 53 Porsche equivalent number : 993 101 170 51 / 99310117051 993 101 170 53 / 99310117053 993 101 170 54 / 99310117054

Mahle gray cast cylinder Suitable for Porsche 911 2.2T and 2.4T year 70 - 73 Manufacturer : Mahle Manufacturer number : 503 WR 06 Bore 84 mm Porsche Reference Number 911 104 109 00

Sealing ring SET for oil cooler Suitable for all Porsche 911 built between 1965-1989 Suitable for Porsche 914/6 You get the set consisting of 2 small hose rings for the oil cooler above Dimension 16.3 X 22 X 9.5 Porsche reference number 999 704 175 50 and 1 large hose sealing ring for the oil cooler below Dimensions 19.5 X 26 X 9.5 Porsche reference number 999 704 173 50

O-ring / Sealing ring for oil cooler, small Suitable for - Porsche 911 / 912, model years 1965 - 1989 - Porsche 914, model years 1970 - 1976 - Porsche 959, model years 1987 - 1988 - Porsche 964, model years1989 - 1994 - Porsche 993, model years 1994 - 1998 - Porsche 996, model years 2001 - 2005 - Porsche 997, model years 2007 - 2008 Manufacturer : Reinz Manufacturer number : 40-77314-20 Porsche comparison number : 999 704 172 50 / 99970417250

Oil pipe / oil hose The oil pipes from the engine block to the right-hand camshaft housing Suitable for Porsche 911, model years 1974 - 1983 Manufacturer : Cohline Manufacturer’s part number : 90110734801 Porsche equivalent part number : 901 107 348 01 / 90110734801